Bosch 120 Series - Maintenance and Service Notes

PI − 34.51 enProduktinformation FMC−120−DKM / ESTGLT
Page 13 of 18
BDL−F.01U.066.178
A2.en/ 11.04.2007
ST−FIR/ PRM1 / sib
a b a’ b’
1
150W
2k21 W
0W
R3
R1
0W
R5
R4
R6
E
2 3 4
5
T.1
T.2
T.3
678910
820W
Do not remove the end of line resistor from the last detector!
It must be removed from all other detectors.
8. Notes on maintenance and service
For maintenance and inspection work on security systems, the regulations of DIN VDE 0833
apply in Germany; these regulations refer to the maintenance intervals as per the manufac-
turer’s instructions.
D Bosch ST recommends a functional and visual inspection at least once a year.
D Maintenance and inspection work should be carried out regularly and by trained personnel.
8.1. Repair
In the event of a defect, the entire unit is exchanged.
8.2. Disposal
Unusable units should be disposed of in accordance with regulations.
8.3. Additional documentation
For those with the appropriate access authorisation,
see Bosch ST ExtraNet at
www.boschbest.de
for the updated product information and the installation manual as a downloa-
dable PDF file.