Need help?Do you have a question about the Bosch Solution 16plus and is the answer not in the manual?
General| Partitions | 2 |
|---|---|
| Battery Backup | 12V 7Ah rechargeable battery |
| Event Log Capacity | 256 events |
| Number of Zones | 16 |
| Communication | PSTN, optional GSM/GPRS module |
| Power Supply | 16.5VAC, 40VA transformer |
| Operating Temperature | 0°C to 50°C |
| Outputs | 4 |
| Keypads Supported | Up to 4 |
Legal notices regarding copyright, trademarks, and limitations of liability.
Important note regarding Telecom acceptance and device operation.
Critical safety and operational warnings for product installation and use.
Lists the main features and capabilities of the Solution 16plus control panel.
Explains the function of Zones, Areas, Dialler, Keypads, History Log, and Programming.
Details cabinet mounting, module spaces, LED indicators, and address selection.
Illustrates various zone wiring configurations and EOL resistor color codes.
Provides a visual representation of the main control panel PCB layout and its connectors.
Illustrates how to connect various components like keypads, power, and telephone lines.
Describes terminal block functions, board connectors, and basic keypad key operations.
Explains how to set unique addresses for keypads connected to the system.
Details the meaning of status icons, LEDs, and various keypad alert tones.
Introduces the programming interface, navigation methods, and menu structure.
Covers initial setup steps, service mode activation, and system defaulting.
Details hardware/software default methods and domestic template settings.
Explains zone array view, reporting setup, and direct link programming.
Provides a comprehensive table of all programming menus and required user access levels.
Details configuration options for zones, RF devices, and general input settings.
Covers output settings, event types, polarity, and output testing procedures.
Describes communication commands, registration, and telephone number programming.
Configures call forwarding, SMS passwords, dialler options, and phone line settings.
Details settings for call back numbers, RAS PIN, log thresholds, and RAS options.
Configures dialler transmission formats, reporting routes, and report delays.
Covers communication testing, LAN status, keypad volume, contrast, and backlight.
Details configurations for keypads, RF devices, and serial device communication.
Configures panel status, clock settings, timers, and power options.
Covers setting up schedules, days, functions, holidays, and their dates.
Configures system options, installer settings, language, and testing procedures.
Guides on performing walk tests, audible tests, and strobe tests for system verification.
Details electrical specifications, operating conditions, and environmental limits.
Lists compatible keypads, accessories, and physical dimensions of the panel.
Lists the components included in the panel package and resistor pack.
To Next Page
