Need help?Do you have a question about the Bosch MIC IP starlight 7000i and is the answer not in the manual?
General| Camera Type | PTZ |
|---|---|
| Ingress Protection | IP68 |
| Operating Temperature | -40°C to +60°C (-40°F to +140°F) |
| Video Compression | H.265, H.264, MJPEG |
| Focal Length | 4.3 mm to 129 mm |
| Aperture | F1.6 to F4.7 |
| WDR | 120 dB |
| Frame Rate | Up to 60 fps |
| Vandal Resistance | IK10 |
| Zoom | 30x optical |
| Power Source | 24 VAC or High PoE |
| Features | Starlight technology, Intelligent Video Analytics |
| Sensor Type | CMOS |
| Lens Type | Varifocal |
| Day/Night | Yes |
| Network Interface | RJ-45 |
| Power | High PoE (60 W) / 24 VAC |
System requirements for using the web browser interface.
Steps to establish a network connection to the unit via IP address.
Process for setting and using a service-level password for security.
Overview of the Live page for viewing video and controlling the unit.
Overview of the Configuration page for unit settings and saving changes.
Overview of the Playback page for viewing recorded sequences.
Detailed operations on the Live page, including connection and PTZ controls.
How to view, search, and export recorded video sequences via the browser.
Settings for device name and ID for identification purposes.
Managing user accounts, authentication modes, and passwords.
Configuring date, time, and time zone for accurate recording and synchronization.
Configuring overlays like camera name, time, and logo on the video image.
Parameters for GB/T 28181 standard conformance for video monitoring systems.
Customizing the web interface appearance, language, and logos.
Adapting LIVE page functions for displaying information and controls.
Initial setup and configuration options for camera installation.
Selecting and configuring video signal encoding profiles for data transmission.
Configuring resolutions and profiles for video streams.
Blocking specific areas in the video feed for privacy or monitoring purposes.
Adjusting image quality using pre-programmed modes and manual controls.
Configuring autofocus, focus speed, and iris for optimal image focus.
Configuring pan, tilt, zoom, and movement behaviors of the camera.
Configuring how the camera responds to alarms, including IP connections.
Overview of VCA fields, configuration, and alarm status.
Creating virtual masks to exclude areas from flow analysis and Intelligent Tracking.
Configuring the camera to generate alarms based on audio signals.
Setting up the camera to send alarm notifications via email.
Editing scripts for advanced alarm functions, overwriting other settings.
Defining rules to link inputs to outputs for automatic camera responses.
Configuring serial port settings for communication with peripherals.
Activating or deactivating available network services like HTTP, RTSP, etc.
Enabling DynDNS for internet access via host name without knowing the IP address.
Implementing advanced network settings for operation and authentication.
Managing network protocols like SNMP and UPnP.
Enabling simultaneous data reception on multiple receivers using multicast.
Configuring image posting settings like size, filename, and target server.
Defining accounts for posting and recording export (FTP, Dropbox).
Configuring filters to allow or block network traffic by address or protocol.
Accessing encryption parameters if an encryption license is installed.
Updating firmware, viewing upload history, and managing configuration files.
Activating additional functions via license codes.
Adding and managing security certificates for the camera.
Selecting log levels and the number of entries to display.
Accessing the Built-in Self Test (BIST) for camera status.
Displaying system information for technical support purposes.
Guidelines for optimizing camera life, including tours and illumination.
Configuring and implementing intelligent video analytics for object tracking.
Uploading custom logos to display on the web browser.
Displaying and calibrating camera orientation and heading information.
Activating and configuring the wiper/washer function using Bosch protocol.
Activating and configuring the wiper/washer function using Pelco protocol.
Setting up IR illumination based on night mode and focus correction.
Identifies common camera issues and provides actions to resolve them.
Lists status codes, descriptions, and recommended actions for camera conditions.
List of AUX commands for controlling camera functions and settings.
To Next Page