18 | English
2 609 932 745 | (4.12.09) Bosch Power Tools
Technical Data
Noise/Vibration Information
Measured sound values determined according
to EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 79 dB(A);
Sound power level 90 dB(A). Uncertainty
K=3dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a
h
=3.0 m/s
2
, Uncer-
tainty K =1.5 m/s
2
.
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
tal working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
Declaration of Conformity
We declare under our sole responsibility that
the product described under “Technical Data” is
in conformity with the following standards or
standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 98/37/EC (until 28 Dec 2009),
2006/42/EC (from 29 Dec 2009).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
18.11.2009
Planer GHO 14,4 V
Professional
GHO 18 V
Professional
Article number
0 601 595 4.. 3 601 E95 3..
Rated voltage
V= 14.4 18
No-load speed
min
-1
13000 13000
Planing depth
mm 0 – 1.6 0–1.6
Rebating depth
mm 0– 8 0–8
Planing width, max.
mm 82 82
Weight according to EPTA-Procedure 01/2003
kg 2.9 3.1
Please observe the article number on the type plate of your machine. The trade names of the individual machines
may vary.
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Head of Product
Certification
OBJ_BUCH-639-002.book Page 18 Friday, December 4, 2009 2:00 PM
To Next Page