Bosch 3 611 B67 200 User Manual

INSTANDSETZUNGSHINWEISE
REPAIR INSTRUCTIONS
INSTRUCTIONS DE REPARATION
INSTRUCCIONES DE REPARACION
Änderungen vorbehalten. Unsere Erzeugnisse werden stets
dem neuesten technischen Stand angepaßt. Deshalb behalten
wir uns Änderungen vor.
Modifications. Our products are constantly modified to meet
new technical standards. We therefore reserve the right to
alter data and specifications without prior notice.
Modifications. Nos produits sont continuellement adaptés aux der-
nières nouveatés techniques et les dates sont données sous réserve
de changement.
Modificationes. Nuestros fabricados van siendo adaptos constante-
mente a las últimas conquistas téchnicas. Por ello, tenemos que reser-
varnos el derecho de introducir modificationes en los datos téchnicos.
Bohrhammer
Rotary Hammer
Marteau perforateur
Martillo perforador
Typ 3 611 B67 200 = GBH 2-28 DFV
Attention: Repair, modification, and testing of power tools must be carried out in
accordance with the generally recognised principles of engineering practise. Safety
regulations according to DIN VDE, CEE, AFNOR and further regulations applicable in
individual countries must be observed.
Beachten: Instandsetzung, Änderung und Prüfung von Elektrowerkzeugen sind
fachgerecht durchzuführen. Die Sicherheitsvorschriften nach DIN VDE, CEE,AFNOR und
weitere in den einzelnen Ländern gültigen Vorschriften sind einzuhalten.
Obsérvese: La reparación, modificación y verificación de herramientas electricas mano
debe efectuarse en forma técnicamente correcta. Respetar las normas de seguridad
segun DIN VDE, CEE, AFNOR, asi como otras disposiciones vigentes en los distinos
paises.
Attention: La remise en état, la modification et le controle des outils électriques doivent
etre ef- fectués par des personnes qualifiées. Il convient de respecter les prescriptions
de sécurite selon DIN VDE, CEE, AFNOR, ainsi que les réglementations en vigueur dans le
pays concerné.
3 611 B67 200 - D01 (2012-01)
Robert Bosch GmbH
.
PowerTool Devision
.
PT-AS/DOC
.
70745 Leinfelden-Echterdingen

Bosch 3 611 B67 200 Specifications

General

Brand	Bosch
Model	3 611 B67 200
Category	Rotary Hammer
Language	English

Summary

Repair Instructions Overview

Disassembly Procedures

Power Supply Check Before Disassembly

Check power supply and adhere to safety regulations before disassembly.

Disassembly Guidance

Follow exploded views, section plans, and repair instructions for disassembly.

Safety Clutch Testing

Check Release Torque of Safety Clutch

Verify the safety clutch's release torque and replace if it fails the test.

Assembly Procedures

Assembly Using Diagrams and Instructions

Assemble using exploded diagrams and provided repair instructions.

Lubrication Guidance for Assembly

Follow specific lubrication instructions for assembly.

Installation and Electrical Checks

Check Installation Position

Ensure correct installation position for components like the switch and brush holder.

Lubrication and Greasing Steps

Lubricate Sliding Surfaces

Apply grease to sliding surfaces as per instructions.

Component Attachment and Grease Application

Attach Components with Grease

Secure components using grease as indicated in the diagrams.

Specialized Assembly Tools and Checks

Utilize Old Piston as Auxiliary Tool

Utilize an old piston as an auxiliary tool for a specific assembly step.

Grease Application and Cavity Filling

Fill Cavity Between Sealing Lips

Inject grease into the cavity between the sealing lips of the component.

Note Parts Supplied Pre-Greased

Note that certain parts are supplied pre-greased.

Gear Compartment Lubrication

Grease Gear Compartment and Parts

Apply 30g grease to parts and the remainder to the gear compartment.

Final Operational and Safety Checks

Power Supply and High-Voltage Check

Perform a high-voltage test and observe safety regulations.

Perform Test Run and Functional Checks

Conduct operational, impact, electrical, and mechanical tests.