To Next PageTo Next Page
Need help?Do you have a question about the Bosch 8-115 Z and is the answer not in the manual?
General| Disc Diameter | 115 mm |
|---|---|
| No-load Speed | 11000 rpm |
| Spindle Thread | M14 |
| Cable Length | 2.5 m |
| Vibration Emission | 6.5 m/s² |
Comprehensive safety instructions covering general, work area, electrical, personal safety, tool use, and service.
Safety advice common for grinding, sanding, wire brushing, and cutting operations.
Hazards and precautions related to tool kickback during operation.
Further safety advice for specific operating conditions and scenarios.
Detailed specifications and performance data of the angle grinder.
Measured noise and vibration levels during operation.
Instructions for attaching guards, hoods, auxiliary handles, and extraction devices.
Procedures for attaching discs, brushes, plates, and clamping nuts.
Steps for safely switching the power tool on and off.
Tips and precautions for effective and safe operation of the tool.
Steps for keeping the tool and ventilation slots clean.
Information on obtaining after-sales service and application support.
Identifier for the product within the conformity declaration.
