Bosch 8-115 - Page 10

English | 11
Bosch Power Tools 1 619 P02 645 | (8.7.08)
Product Features
The numbering of the product features refers to
the illustration of the power tool on the graphics
page.
1 Release lever for protection guard
2 Spindle lock button
3 Dial control for speed preselection
(GWS 11-125 CIE/GWS 14-125 CIE/
GWS 14-125 CIT)
4 On/Off switch
5 Auxiliary handle
6 Grinder spindle
7 Extraction hood for sanding*
8 Mounting flange with O-ring
9 Carbide grinding head*
10 Clamping nut
11 Quick-clamping nut *
12 Protection guard for grinding
13 Protection guard for cutting*
14 Grinding/cutting disc*
15 Hand guard*
16 Rubber sanding plate*
17 Sanding sheet*
18 Round nut*
19 Cup brush*
20 Cutting guide with dust extraction protection
guard *
21 Diamond cutting disc*
*The accessories illustrated or described are not in-
cluded as standard delivery.
Technical Data
Angle Grinder GWS ...
Professional
8-115 8-125 10-125 11-125
CI
11-125
CIE
Article number
3 601 ... H20 ... H27 ... H21 ... H22 ... H23 ...
Rated power input
W800800 1000 1100 1100
Output power
W500500 630 660 660
Rated speed
rpm 11000 11000 11000 11000 11000
Speed control adjustment
rpm – ––– 2800
– 11000
Grinding disc diameter, max.
mm 115 125 125 125 125
Thread of grinder spindle
M 14 M 14 M 14 M 14 M 14
Thread length (max.) of grinder spindle
mm 22 22 22 22 22
Kickback stop
– ––zz
Restarting protection
– ––zz
Reduced starting current
– ––zz
Constant electronic control
– ––zz
Speed Preselection
– ––– z
Weight according to EPTA-Procedure
01/2003
kg 1.9 1.9 2.1 2.0 2.0
Protection class
/II /II /II /II /II
OBJ_BUCH-348-002.book Page 11 Tuesday, July 8, 2008 1:34 PM