6 | English
F 016 L81 270 | (24.9.15) Bosch Power Tools
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-15.
Typically the A-weighted noise levels of the product are:
Sound pressure level 67 dB(A); sound power level 87 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745-2-15:
a
h
<2.5m/s
2
, K=1.5 m/s
2
.
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical data” is in conformity with all rele-
vant provisions of the directives until 19 April 2016:
2006/95/EC, from 20 April 2016 on: 2014/35/EU,
2011/65/EU, until 19 April 2016: 2004/108/EC, from
20 April 2016 on: 2014/30/EU, 2006/42/EC, 2000/14/EC
including their amendments and complies with the following
standards: EN 60745-1, EN 60745-2-15 (battery powered
product), EN 60335-1, EN 60335-2-29 (battery charger).
2000/14/EC: Guaranteed sound power level 90 dB(A).
Conformity assessment procedure according to Annex V.
Equipment category: 25
Technical file (2006/42/EC, 2000/14/EC) at:
Bosch Lawn and Garden Ltd., PT-HG/ENS-PA2,
Stowmarket, Suffolk IP14 1EY, England
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
Leinfelden, 23.09.2015
Battery Charger AL 1130 CV AL 1130 CV AL 1130 CV
Article number
EU
UK
AUS
2 607 225 133
2 607 225 135
2 607 225 137
2 607 225 133
2 607 225 135
2 607 225 137
2 607 225 133
2 607 225 135
2 607 225 137
Charging current
mA 3000 3000 3000
Allowable charging temperature range
°C 0 –45 0–45 0–45
Charging period (battery discharged)
min 45 45 45
Weight according to EPTA-Procedure 01/2003
0.3 0.3 0.3
Protection class
kg / II / II / II
Battery Charger
AL 1115 CV AL 1115 CV AL 1115 CV
Article number
EU
UK
AU
2 607 225 513
2 607 225 515
2 607 225 517
2 607 225 513
2 607 225 515
2 607 225 517
2 607 225 513
2 607 225 515
2 607 225 517
Charging current
mA 1500 1500 1500
Allowable charging temperature range
°C 0 –45 0 –45 0–45
Charging period (battery discharged)
min 80 80 80
Weight according to EPTA-Procedure 01/2003
kg 0.3 0.3 0.3
Protection class
/ II / II / II
Cordless hedge trimmer AHS 35-15 LI AHS 350 LI AHS 45-15 LI
Henk Becker
Executive Vice President
Engineering
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
OBJ_BUCH-1809-004.book Page 6 Thursday, September 24, 2015 8:39 AM
To Next Page
Loading...
