12 | English
F 016 L81 732 | (29.5.17) Bosch Power Tools
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Mounting and Operation
Troubleshooting
After-sales Service and Application
Service
www.bosch-garden.com
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the garden product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Action Figure Page
Delivery Scope
1 167
Connecting the extension lead
2 167
Starting
2 167
Stopping
2 168
Working Advice
2, 3 167– 168
Blade Maintenance
4 169
Storage and Transport
4 169
Selecting Accessories
5 169
Problem Possible Cause Corrective Action
Hedgecutter does not operate Power turned off Turn power on
Mains socket faulty Use another socket
Extension cable damaged Inspect cable, replace if damaged
Fuse faulty/blown Replace fuse
Hedgecutter operates intermittently Extension cable damaged Inspect cable, replace if damaged
Internal wiring of machine damaged Contact Service Agent
On/Off switch defective Contact Service Agent
Motor runs but blades remain stationary Internal fault Contact Service Agent
Cutting blade hot Cutting blade blunt Have blade sharpened
Cutting blade has dents Have blade inspected/overhauled
Too much friction, due to lack of lubricant Apply lubricant spray (1 609 200 399)
Excessive vibrations/noise Machine defective Contact Service Agent
OBJ_BUCH-1297-008.book Page 12 Monday, May 29, 2017 10:18 AM
To Next Page
Loading...
