EasyManua.ls Logo

Bosch ARM 34 - Declaration of Conformity; Intended Use

Bosch ARM 34
190 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English | 13
Bosch Power Tools F 016 L81 169 | (27.11.14)
Keep all nuts, bolts and screws tight
to be sure that the machine is in safe
working condition.
Check the grass catcher frequently
for wear or deterioration.
Examine the machine and replace
worn or damaged parts for safety.
Ensure replacement cutting means of
the right type are used.
Ensure replacement parts fitted are
Bosch approved.
Before storage ensure machine is
clean and free from debries, if neces-
sary clean with a soft, dry brush.
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the garden product in a better
and safer manner.
Intended Use
The garden product is intended for domestic lawnmowing.
Technical Data
Noise/Vibration Information
Sound emission values determined according to
EN 60335-2-77.
Typically the A-weighted noise levels of the product are:
Sound pressure level 79 dB(A); sound power level 93 dB (A).
Uncertainty K=1 dB.
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60335:
a
h
<2.5m/s
2
, K =1.5 m/s
2
.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with all rele-
vant provisions of the directives 2011/65/EU, 2014/30/EU,
2006/42/EC, 2000/14/EC including their amendments and
complies with the following standards: EN 60335-1,
EN 60335-2-77.
2000/14/EC: Guaranteed sound power level 94 dB(A). Con-
formity assessment procedure according to Annex VI.
Equipment category: 32
Notified body:
TÜV Rheinland Intercert Kft., Budapest, Hungary, Nr. 1008
Technical file (2006/42/EC, 2000/14/EC) at:
Bosch Lawn and Garden Ltd., PT-LG/ENS23,
Stowmarket, Suffolk IP14 1EY, England
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
27.11.2014
Symbol Meaning
Movement direction
Reaction direction
Wear protective gloves
Weight
Switching On
Switching Off
Permitted action
Prohibited action
Accessories/Spare Parts
Lawnmower Rotak 32
Ergoflex
Article number 3 600 H85 E..
Rated power input
W1200
Blade width
cm 32
Height of cut
mm 30 60
Grassbox, capacity
l31
Weight according to
EPTA-Procedure 01/2003
kg 8.6
Protection class
/II
Serial number see type plate on the gar-
den product
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your garden prod-
uct. The trade names of the individual garden products may vary.
Henk Becker
Executive Vice President
Engineering
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
OBJ_BUCH-1739-002.book Page 13 Thursday, November 27, 2014 8:14 AM

Related product manuals