To Next PageTo Next PageWhat to do if my Bosch ART 23 SL won't turn on?
If your Bosch Trimmer isn't operating, there could be several reasons. First, ensure the power is turned on. If it is, check if the mains socket is faulty by trying another socket. Inspect the extension cable for any damage and replace it if necessary. Finally, check the fuse and replace it if it's faulty or blown.
Why my Bosch ART 23 SL isn't cutting grass?
If your Bosch Trimmer isn't cutting, the cutting line may be too short or broken off. Replace the cutting line to resolve this issue.
Why does my Bosch Trimmer start and stop?
If your Bosch Trimmer runs intermittently, the extension cable might be damaged. Inspect the cable and replace it if needed. It is also possible that the internal wiring of the trimmer is damaged, in that case you should contact a Service Agent.
What causes the line to keep breaking on my Bosch ART 23 SL Trimmer?
If the line keeps breaking on your Bosch Trimmer, it could be due to the line inside the spool being entangled. Inspect the spool and rewind if necessary.
How to fix a Bosch ART 23 SL Trimmer when the line won't feed?
If the line cannot be fed on your Bosch Trimmer, the spool may be empty. Replace the spool to fix this.
Why does the line keep retracting into the spool on my Bosch ART 23 SL?
If the line retracts into the spool on your Bosch Trimmer, it may be because the line wasn't bump fed. Try rewinding the spool.
What to do if the line is tangled inside the spool of my Bosch ART 23 SL Trimmer?
If the line is entangled inside the spool of your Bosch Trimmer, inspect the spool and rewind if necessary.
Why does my Bosch Trimmer struggle when cutting grass?
If your Bosch Trimmer labors, it may be because the grass is too high. Try cutting in stages.
General| Power source | Electric AC |
|---|---|
| Spool size | 1.6 mm x 4 m |
| Product color | Black, Green |
| Rotational speed | 12500 RPM |
| Cutting diameter (max) | 230 mm |
Weight and Dimensions| Weight | 1700 g |
|---|
Defines the meaning of various symbols used in the manual for hazard identification and operational guidance.
Covers warnings about cord condition, extension cords, checking for damage, operating while impaired, and appropriate attire.
Details on maintaining footing, balance, avoiding overreaching, and ensuring children's safety.
Guidance on using RCDs, protection against splash water, and cable strain relief for extension cords.
Information on BS 1363/A plugs, internal fuses, and proper replacement procedures.
Specifies the intended use for cutting grass and weeds, and limitations regarding edging.
Explanation of various symbols indicating actions, warnings, and accessories for safe operation.
Presents sound pressure and power levels, along with vibration emission values and uncertainty factors.
States conformity with EU directives and relevant standards, including sound power level guarantees.
Instructions on assembly, connecting to mains, and checking guard tightness and tube joint position.
Details on automatic and manual feeding of the cutting line, including spool replacement.
Addresses problems like trimmer failure, intermittent running, stalling, and poor cutting performance.
Solutions for issues with line feeding, spool entanglement, and line breaking.
Provides contact details for service and spare parts in various countries and regions.
Instructions for environmentally correct disposal of garden products, especially for EC countries.
