EasyManua.ls Logo

Bosch Art 2600 Easytrim Accu User Manual

Bosch Art 2600 Easytrim Accu
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
F016 L70 455 • 06.08
360°
1
2
3
5
14
4
6
8
9
10
7
12
11
13
F016 L70 455 - U2 Seite 2 Montag, 15. Januar 2007 8:56 08
Question and Answer IconNeed help?

Do you have a question about the Bosch Art 2600 Easytrim Accu and is the answer not in the manual?

Bosch Art 2600 Easytrim Accu Specifications

General IconGeneral
Battery Voltage18 V
Cutting Width/Diameter26 cm
RuntimeUp to 30 minutes
Power SourceBattery
Battery TypeLithium-ion
TypeCordless Trimmer

Summary

Product Specification

Intended Use

Introduction

Delivered Items

Operating Controls

On/Off Switch

Controls the power to the trimmer, turning it on or off.

Handle

The main grip for holding and maneuvering the trimmer.

Guide Handle

An auxiliary handle for better control and stability.

Shaft, Upper

The upper section of the shaft connecting the handle to the trimmer head.

Shaft, Lower

The lower section of the shaft connecting the upper shaft to the trimmer head.

Trimmer Head

The part of the trimmer that holds the cutting line or blade.

Ventilation Slots

Openings for air circulation to cool the motor.

Cutting Guard

Protective shield around the cutting head to prevent injury.

Battery

The power source for the cordless trimmer.

Battery Charger

Device used to recharge the trimmer's battery.

Charging Compartment

The area where the battery is placed for charging.

LED Indicator

Light emitting diode showing charging status or other indicators.

Mains Plug

The plug that connects the charger to the power outlet.

Serial Number

Unique identification number of the product.

Safety Precautions

Safety: Power Off Before Maintenance

Turn off and remove battery before adjusting, cleaning, or servicing the machine.

Safety: Blade Rotation Warning

Caution: Blade continues to rotate briefly after switching off; avoid contact.

Charging Procedure

Charging Process Initiation

Charging starts when plug is in and battery is inserted; LED indicates current flow.

Charging Completion

Disconnect charger and remove battery after charging; max charge time 5.5 hours.

Charging Completion Indicator

Battery temperature increase indicates full charge.

Charging Advice

Charger Warm-up

Charger may warm up during use; this is normal and not a defect.

Battery Conditioning

New batteries reach full capacity after 5 charge cycles; leave until warm.

Battery Replacement Indicator

Reduced working time after charging indicates battery wear and need for replacement.

Product Assembly

Shaft Assembly

Connect upper and lower shafts until they click; ensure cable is not trapped.

Cutting Guard Mounting

Attach cutting guard to trimmer head and push until secure.

Fitting Cutting Disc/Fitting Blade

Disc/Blade Attachment

Attach cutting disc or blade to the drive adaptor securely.

Cutting and Edging

Pre-cutting Area Preparation

Clear cutting area of debris and obstacles before operation.

Blade Stop Delay

Allow blade to stop rotating after switching off before next operation.

Switching Frequency Warning

Avoid rapidly switching the trimmer on and off to prevent damage.

Switching On and Off

Trimmer Operation

Press switch to turn on; release to turn off.

Cutting Grass

Grass Cutting Technique

Move trimmer side-to-side, away from body, for efficient cutting.

Cutting Tall Grass

Cut grass up to 15cm efficiently; taller grass requires multiple passes.

Cutting Around Trees and Bushes

Tree/Bush Cutting Caution

Cut carefully around trees/bushes to avoid damaging bark.

Battery Duration

Maintenance

Maintenance Safety

Always remove battery before performing maintenance or checks.

Regular Component Checks

Check for loose parts, wear, damage, and ensure guards are fitted correctly.

Professional Repair

For failures, seek repair from an authorized service agent.

Parts Ordering Information

Include 10-digit part number (TYP) for correspondence and spare parts.

Blade Maintenance

Blade Maintenance Safety

Remove battery before any work on the blade.

Blade Removal

Push worn blade in arrow direction until it snaps off pivot.

Pivot Cleaning

Clean pivot with a sharp knife to remove debris.

New Blade Installation

Place eyelet over pivot and pull outwards until it snaps into place.

Blade Compatibility

Use only Bosch approved replacement blades for optimal performance and to prevent damage.

After Trimming/Storage

Storage Safety

Remove battery before storage and ensure it is secured.

Exterior Cleaning

Clean exterior with soft brush/cloth; avoid water/solvents.

Guard Cleaning

Clean cutting guard inside, use wooden/plastic tool for compacted debris.

Battery Storage Conditions

Store battery between 0-45°C to prevent damage.

Fault Finding

Guard Fit Issue

Check guard fit over cutting disc for incorrect assembly.

Machine Fails to Operate

Recharge battery if machine fails to operate.

Intermittent Machine Functions

Contact service agent for internal wiring or switch defects.

Excessive Vibration/Noise

Contact service agent for machine or blade faults causing vibration.

Low Cutting Time

Fully charge battery or cut grass in stages for low cutting time.

Blade Will Not Move

Recharge battery or replace blade if blade does not move.

Machine Not Cutting

Check for entangled grass, recharge battery, or replace blade.

No Charging Procedure

Clean battery contacts or replace battery if charging fails.

LED Indicator Not Lighting

Ensure plug is inserted, check socket/cable/charger for issues.

Disposal

Environmental Disposal

Sort product, accessories, and packaging for eco-friendly recycling.

EC Waste Directive

Do not dispose of product in household waste; follow EU directive for collection.

Service Information

Spare Parts & Manuals

Find exploded views and spare parts information at www.bosch-pt.com.

Contact Information

Great Britain Service

Contact details for Robert Bosch Ltd. service in Great Britain.

Australia Service

Contact details for Robert Bosch Australia Ltd. service.

New Zealand Service

Contact details for Robert Bosch Limited service in New Zealand.

Ireland Service

Contact details for Beaver Distribution Ltd. service in Ireland.

Malaysia Service

Contact details for Robert Bosch (SEA.) Pte. Ltd. service in Malaysia.

Declaration of Conformity

Noise and Vibration Levels

Details measured noise and hand/arm vibration levels according to EC standards.

Compliance Standards

Product conforms to EN 786, EN 60 335 and relevant EU directives.

Guaranteed Sound Power Level

Guaranteed sound power level LWA is lower than 94 dB (A) per 2000/14/EC.

Notified Body Information

Conformity assessment by Notified Body SRL, Sudbury England (ID: 1088).

Safety Notes

General Safety Instructions

Read instructions carefully, familiarize with controls and proper use.

Explanation of Symbols

Alerts for general hazard, manual reading, and eye protection.

Bystander Safety

Keep bystanders away from machine due to thrown objects.

Pre-Operation Safety

Remove battery before adjusting, cleaning, or leaving unattended.

Weather and Guards

Do not operate in rain; use with intact guards only.

Charger and Cord Safety

Do not use charger if cord is damaged.

Impact Check

Check for wear/damage after impact and repair if necessary.

Footwear and Attire

Wear substantial footwear and long trousers; no open sandals.

Operator Age and Familiarity

Only trained/authorized operators; store out of children's reach.

Proximity Warning

Never operate with people, especially children, nearby.

Operator Responsibility

Operator is responsible for accidents to third parties or property.

Blade Stop Wait

Wait for blade to completely stop before touching.

Work Environment

Work in daylight or good light; avoid wet grass if possible.

Transport Safety

Switch off when transporting trimmer to and from work area.

Operation Controls Safety

Switch on with hands/feet away from rotating line; keep clear of blade.

Cutting Element Restrictions

Never fit metal cutting elements; use only approved parts.

Trimmer Maintenance

Inspect and maintain regularly; repairs by authorized agents only.

Ventilation Slot Clearance

Ensure ventilation slots are kept clear of debris.

Battery Removal for Tasks

Switch off and remove battery before tasks like blade replacement or cleaning.

Storage Security

Store securely in dry place out of reach of children; do not stack items on top.

Replacement Parts

Ensure replacement parts are Bosch approved.

Battery Insertion Safety

Ensure switch is off before inserting battery pack to prevent accidents.

Charger Specification

Recharge only with the specified manufacturer charger to avoid fire risk.

Battery Pack Usage

Use only designated battery packs; others may cause injury or fire.

Battery Shorting Hazard

Keep battery away from metal objects to prevent shorting and burns/fire.

Battery Liquid Ejection

Avoid contact with ejected battery liquid; flush with water if contact occurs.

Related product manuals