To Next PageTo Next PageWhat to do if my Bosch ART 26 SL Trimmer won't turn on?
If your Bosch Trimmer isn't operating, there could be several reasons. First, ensure the power is turned on. If it is, check if the mains socket is faulty by trying another socket. Inspect the extension cable for any damage and replace it if necessary. Finally, check the fuse and replace it if it's faulty or blown.
Why my Bosch ART 26 SL Trimmer isn't cutting grass?
If your Bosch Trimmer isn't cutting, the cutting line may be too short or broken off. Replace the cutting line to resolve this issue.
Why does my Bosch Trimmer start and stop?
If your Bosch Trimmer runs intermittently, the extension cable might be damaged. Inspect the cable and replace it if needed. It is also possible that the internal wiring of the trimmer is damaged, in that case you should contact a Service Agent.
What causes the line to keep breaking on my Bosch ART 26 SL Trimmer?
If the line keeps breaking on your Bosch Trimmer, it could be due to the line inside the spool being entangled. Inspect the spool and rewind if necessary.
How to fix a Bosch ART 26 SL when the line won't feed?
If the line cannot be fed on your Bosch Trimmer, the spool may be empty. Replace the spool to fix this.
Why does the line keep retracting into the spool on my Bosch ART 26 SL?
If the line retracts into the spool on your Bosch Trimmer, it may be because the line wasn't bump fed. Try rewinding the spool.
What to do if the line is tangled inside the spool of my Bosch Trimmer?
If the line is entangled inside the spool of your Bosch Trimmer, inspect the spool and rewind if necessary.
Why does my Bosch ART 26 SL Trimmer struggle when cutting grass?
If your Bosch Trimmer labors, it may be because the grass is too high. Try cutting in stages.
General| Power source | Electric AC |
|---|---|
| Spool size | 1.6mm x 4m |
| Product color | Green |
| Rotational speed | 12500 RPM |
| Cutting diameter (max) | 260 mm |
Weight and Dimensions| Weight | 1800 g |
|---|
Read instructions, understand symbols, be aware of hazards, and follow safety precautions.
Machine not for persons with reduced capabilities; children must be supervised.
Check guards, cords, store safely, keep distance, avoid thrown objects.
Use RCDs, correct plugs, extension cords, and avoid wet conditions.
Explanation of various symbols used in the manual for safe operation.
Machine is for cutting grass and weeds up to 125 mm, not for edging.
Details on sound pressure, sound power, and vibration emission values.
Instructions for environmentally correct disposal of garden products in EC countries.
