To Next PageTo Next Page
Need help?Do you have a question about the Bosch ART 27 and is the answer not in the manual?
General| Rotational speed | 10500 RPM |
|---|---|
| Height adjustment | 35 mm |
| Cutting diameter (max) | 270 mm |
| Power source | - |
| Adjustable handle | Yes |
Weight and Dimensions| Weight | 2700 g |
|---|
Ensure a safe distance from the product and machine during operation.
Switch off and remove plug before adjustments/cleaning. Keep cord away from cutting line.
Always wear eye and ear protection for safety.
Keep work area clean, well lit, and free of hazards.
Keep bystanders away and check area for wildlife before operating.
Machine plug must match outlet. Avoid adapter plugs with earthed tools.
Do not expose machine to rain or wet conditions; water increases electric shock risk.
Never use cord for carrying. Keep away from heat, oil, sharp edges. Use outdoor-suitable extension cords.
Ensure switch is OFF before connecting or carrying. Remove adjusting keys.
Do not use if the switch does not turn it on/off. Repair if control is lost.
Disconnect plug or remove battery before making adjustments or changing accessories.
Always wait until the machine has come to a complete stop before placing it down.
Never operate with defective or missing guards/safety devices. Ensure proper mounting.
Never operate if the cord is damaged or worn.
Wait until the cutting head has completely stopped before touching it.
Switch off and remove plug when leaving unattended, before replacing line, if cable tangled, before cleaning, or storing.
Switch off and pull plug before any maintenance or cleaning, or if cable is damaged.
Extension cables must be earthed, watertight, and intended for outdoor use.
Press and hold On/Off switch to turn on; release to turn off. Allow motor to stop.
Lists common problems, possible causes, and corrective actions for trimmer operation.
Instructions for keeping the tool clean, safe storage, and ensuring all parts are tight.
