Rack Accessories Figure 1
Flip Tines (model dependent)
The racks consist of tines that can be folded down depending on what you
may need to load in the rack. To fold down, grasp the folding tine and
release from notch. Push folding tine downward to desired position as
shown in Figure 1.
Manual Rack Height Adjustment (model dependent)
Remove the empty top rack by pulling it out of the dishwasher until it can be
lifted upward as show in Figure 2. Pull the rack up and out until the rollers
are completely free of the roller guides.
Reinsert the rack with the other set of rollers on the roller guides as shown
in Figure 3.
Figure 2
Figure 3
To Next Page
Loading...
Need help?
General
