Bosch Ascenta SHE3AR76UC - Operating Your Dishwasher; Starting the Dishwasher; Adding Rinse Aid; Adjusting Settings

8
START YOUR DISHWASHER
1. Press the On/O button.
2. Select a cycle and option if desired.
3. Press Start.
ADJUSTING THE SETTINGS
1. Press the On/O button. Hold down the selection buttons > and
START until the display shows š:‹x (x can be any number).
2. Release both buttons. Press the selection button > until the display
indicates the desired selection.
3. Press button < to choose the desired setting for that selection.
4. Press Start button to save the setting.
max
vent
air
Setting Factory setting Description
§-Rinse Aid
§:‹†-§:‹‡
§:‹† Dispenses the amount of rinse
aid, which aects drying (see
above).
š-Intensive drying
š:‹‹-š:‹‚
š:‹‹/ o Improved drying for
glasses and plastic, by increasing
the temperature and length.
˜-Auto power o
˜:‹‹-˜:‹ƒ
˜:‹‹/ unit does
not shut o
automatically
Unit turns itself o after cycle is
complete, either after 1 minute,
˜:‹‚ or after 2 hours, ˜:‹ƒ.
ADD RINSE AID
This dishwasher is designed to be used
with rinse aid, which enhances drying
results and shine.
• Add rinse aid before rst use and when
the Add Rinse Aid indicator light on the
control panel illuminates.
• Lift tab to open the rinse aid reservoir
and add liquid rinse aid into the oval
until it is full, avoiding air vent. Wipe up
any excess rinse aid that may puddle.
Tip: Remove lid of rinse aid bottle for easier pouring.
The amount of rinse aid dispensed can be set in 6 levels. Only change the
setting if streaks remain on the dishes (lower the amount), or if dishes are not
getting dry enough (increase the amount).
9001490757.ER.indd 8 11/5/2019 11:29:05 AM