Bosch Atino - EU Conformity Standards and Notified Body; Conformity Standards and Notified Body Details

English | 19
Line laser Atino
Levelling accuracy of visible laser line ±0.3°
Length of tape measure 1.5m
Tape measure measuring accuracy ±2mm/m
Tape measure accuracy class 
Operating temperature +5°C to +40°C
Storage temperature –20°C to +70°C
Max. altitude 2000m
Relative air humidity max. 90%
Pollution degree according to IEC61010-1 2
B)
Laser class 2
Laser type 630–650nm, <5mW
C
6
5
Divergence 15×15mrad (full angle)
Battery 1×1.5V LR6(AA)
Operating time at least 5h
Weight according to EPTA-Procedure01:2014 0.26kg
Dimensions (length × width × height) 124× 115× 62mm
A) depending on surface characteristics and ambient conditions
B) Only non-conductive deposits occur, whereby occasional temporary conductivity caused by
condensation is expected.
The serial number (9) on the type plate is used to clearly identify your measuring tool.
Assembly
Inserting/Changing the Battery
It is recommended that you use alkaline manganese batteries to operate the measuring
tool.
u Do not use lithium-ion batteries. This may result in damage to the measuring tool.
To open the battery compartment cover(5), press on the locking mechanism(6) and re-
move the battery compartment cover. Insert the battery.
When inserting the batteries, ensure that the polarity is correct according to the illustra-
tion on the inside of the battery compartment.
Bosch Power Tools 1 609 92A 55E | (12.05.2020)