To Next PageTo Next Page
Need help?Do you have a question about the Bosch GLM 40 Professional and is the answer not in the manual?
General| Accuracy | ± 1.5 mm |
|---|---|
| Laser Class | 2 |
| Laser Type | 635 nm, < 1 mW |
| Dimensions | 105 x 41 x 24 mm |
| Protection Class | IP54 |
| Measurement Time, Typical | < 0.5 s |
| Measurement Time, Max | 4 s |
| Automatic Deactivation | 5 min |
| Automatic Area Calculation | Yes |
| Automatic Volume Calculation | Yes |
| Continuous Measurement | Yes |
| Display Illumination | Yes |
| Measuring Range | 0.15 – 40 m |
| Power Supply | 2 x 1.5 V LR03 (AAA) batteries |
| Weight | 0.1 kg |
| Units of Measurement | m/cm, ft/in |
| Pythagorean Function | Yes |
| Battery Life | up to 5, 000 measurements |
| Storage Temperature | -20°C to +70°C |
How to turn the measuring tool and laser on and off, and safety advice regarding the laser beam.
Step-by-step guide for performing measurements, including reference level and laser activation.
How to perform a single length measurement and view the result on the display.
Using the tracking function to measure distance continuously and view updated values.
Procedure for measuring area by taking two consecutive length measurements.
Steps to measure volume by taking three consecutive length measurements.
How to measure height using two length measurements based on the Pythagorean theorem.
Procedure to verify the accuracy of the distance measuring tool.
Table listing common causes for errors and their corresponding solutions.
