To Next PageTo Next Page
Need help?Do you have a question about the Bosch GLM 80 and is the answer not in the manual?
General| Accuracy | ± 1.5 mm |
|---|---|
| Laser Class | 2 |
| Laser Diode | 635 nm, < 1 mW |
| Measuring Accuracy (typical) | ± 0.2° |
| Measurement Time, typical | < 0.5 s |
| Measurement Time, max. | 4 s |
| Automatic Deactivation | 5 min |
| Memory Capacity (Values) | 20 |
| Dust and Splash Protection | IP54 |
| Tripod Thread | 1/4" |
| Dimensions | 111 x 51 x 30 mm |
| Measuring Range | 0.05 – 80 m |
| Battery Life | up to 25, 000 measurements |
| Display | Illuminated |
| Operating Temperature | -10 – +50°C |
| Storage Temperature | -20°C to +70°C |
Critical warnings about direct eye exposure to laser light and potential vision damage.
Essential safety practices for operating the tool, covering various hazards and precautions.
Detailed procedures to ensure safe use, including handling labels and avoiding misuse.
Critical warnings and instructions for safe handling, charging, and disposal of batteries.
Guidelines for safe operation of the charger, including environmental conditions and compatibility.
Advice on proper battery care, storage, and environmentally sound disposal methods.
Information on Li-ion battery recycling and the importance of environmental protection.
Explanations of common symbols related to electrical properties, safety, and recycling programs.
Identification of symbols indicating listing by UL, CSA, Intertek, and compliance with NOM standards.
Details on the tool's purpose, components, and key functionalities.
Identifies and explains the various indicators and readouts on the tool's display.
Precise specifications for measuring ranges, accuracy, and units for distance and grade.
Technical details on operating conditions, environmental resistance, battery, and charger specifications.
Step-by-step instructions for charging the battery and optimal handling recommendations.
Key considerations and troubleshooting tips for effective and safe battery charging.
Guide to powering on/off the tool and understanding its automatic power-saving features.
How to conduct measurements and select appropriate reference points for accuracy.
Instructions for adjusting settings like tone signals, display illumination, and digital vial.
Step-by-step guides for basic length, area, and volume calculations.
Techniques for measuring distances indirectly when direct methods are not feasible.
Procedures for wall surface measurement and indirect length calculations using angles.
How to use the timer for stability and perform accurate grade measurements.
Procedures for managing stored values and performing calculations like addition and subtraction.
Understanding influences on measurement results and performing accuracy verification.
Solutions for common errors and guidance on cleaning, servicing, and disposing of the tool.
Details on warranty coverage, registration, and the satisfaction guarantee policy.
Information regarding the return policy for dissatisfaction within 30 days of purchase.
