To Next PageTo Next PageHow to fix faulty measurements on different surfaces with Bosch GLM 7000?
If you are experiencing faulty measurements on different surfaces with your Bosch Measuring Instruments, use the laser target plate 20 (accessory) on these surfaces.
How to improve stability when measuring long distances with Bosch GLM 7000 Measuring Instruments?
If you need stability during measurements over larger distances with Bosch Measuring Instruments, use a tripod.
General| Accuracy | ± 1.0 mm |
|---|---|
| Power Supply | 2 x 1.5 V LR03 (AAA) |
| Laser Diode | 635 nm, < 1 mW |
| Measurement Time, Typical | < 0.5 s |
| Measurement Time, Max | 4 s |
| Laser Class | Class 2 |
| Dust and Splash Protection | IP54 |
| Measuring Range | 0.05 to 70 m |
| Automatic Deactivation | After 5 minutes |
| Units of Measurement | m, ft, in |
| Battery Service Life, Individual Measurements, Approx. | 10, 000 |
Identifies the numbered components of the measuring tool and its accessories.
Explains the various symbols and indicators shown on the device's display.
Provides detailed specifications including range, accuracy, operating temperature, and power.
Introduces the product and outlines its intended use and general specifications.
Instructions for safely installing and replacing batteries in the measuring tool.
Steps for first-time use, including safety precautions and device handling.
Guidance on how to power the measuring tool on and off.
Detailed steps for performing measurements, including aiming and initiating.
How to choose the measurement reference point (front, back, or tripod thread).
Information on how the display backlight activates and saves power.
Overview of available measurement modes like length, area, and volume.
Step-by-step guide for performing basic length measurements.
Procedure for removing the last measured value.
Instructions for summing up multiple measured values.
Guidance on how to subtract measured values.
Factors affecting the tool's measurement distance and visibility.
Details on how different surfaces and conditions impact measurement accuracy.
Method for verifying the precision of distance measurements.
Guidance on using an optional tripod for stable and accurate measurements.
Lists common errors and their corresponding solutions.
Instructions for proper cleaning and care of the measuring tool.
