To Next PageTo Next Page
Need help?Do you have a question about the Bosch GLM 42 and is the answer not in the manual?
General| Accuracy | ± 1.5 mm |
|---|---|
| Laser Diode | 635 nm, < 1 mW |
| Laser Class | Class 2 |
| Measuring Time, typical | 0.5 s |
| Measuring Time, max. | 4 s |
| Automatic Deactivation | After 5 minutes |
| Dust and Splash Protection | IP54 |
| Tripod Thread | 1/4" |
| Protection Class | IP54 |
| Power Supply | 2 x 1.5 V AAA |
| Units of Measurement | m, ft, in |
| Display | LCD |
| Battery Type | AAA |
| Operating Temperature | 0 to 40 °C |
| Storage Temperature | -20°C to +70°C |
Definitions of safety alert symbols used in the manual.
Essential safety precautions for operating the laser measure to prevent injury.
How to power the laser measure on, off, and retain settings.
Step-by-step guide to perform measurements and select functions.
How to choose the measurement reference point (rear, front, tripod).
How to measure height indirectly using the device's indirect measurement function.
