line a. The time period can be
adjusted between 1 s and 60 s by
pressing the plus button 11 or the
minus button 5.
The measurement takes place
automatically after the set time
period has elapsed.
The timer function
can also be
used for distance
m e a s u r e m e n t s
within other
measuring modes
(e.g. area/surface
measurement). Adding and
subtracting measuring results as
well as continuous measurements
are not possible.
List of the last Measuring
Values
The measuring tool stores the last
20 measuring values and their
calculations, and displays them in
reverse order (last measured
value first).
To recall the stored
measuremen ts,
press button 7.
The result of the
last measurement
is indicated on the
display, along with
the indicator for the measured
value list e and the memory
location of the displayed
measurements.
When no further measurements
are stored after pressing button 7
again, the measuring tool switches
back to the last measuring
function. To exit the
measured-value list, press one of
the measuring-mode buttons.
To continuously save the currently
displayed length measurement
value as a constant, press and
hold the measured-value list
button 7 until “CST” is indicated
on the display. A measured value
list entry cannot be subsequently
saved as a constant.
To use a length measurement
value in a measuring mode (e. g.
area/surface measurement), press
the measured-value list button 7,
select the desired entry and
confirm by pressing the result
button 6.
Deleting Measured Values
Briefly pressing button 8 deletes
the last individual measuring value
determined in all measuring
functions. Briefly pressing the
button repeatedly
deletes the individual measured
values in reverse order.
To delete the currently displayed
measured value list entry, briefly
press button 8.
To delete the complete measured
value list and the constant “CST”,
press and hold the
measured-value list button 7 and
at the same time briefly press
button 8.
In wall surface measurement
mode, briefly pressing button 8 the
first time deletes the last
individually measured value;
-27-
To Next Page
Loading...
