Bosch AVR 1100 User Manual (English)

Other manuals for Bosch AVR 1100

Questions and Answers:

J
John HortonAug 7, 2025
Why my Bosch AVR 1100 Lawn Mower functions intermittently?
- C
  Candace BowmanAug 7, 2025
  If your Bosch Lawn Mower functions intermittently, the possible causes include a damaged extension cable (inspect and replace if needed), damaged internal wiring (contact a service agent), worn or missing tines/blades (for ALR 900, fit a replacement; for AVR 1100, contact a service agent), wet conditions (increase the height of cut), too much debris on the ground, possible clogging (check underneath the machine and clear, wearing gardening gloves), raking/verticutting too low (increase height of cut), grass too long (cut the grass), a very uneven surface (increase height of cut), or a full grassbox (empty it regularly).
M
morganjoshuaAug 13, 2025
How to improve poor collection of my Bosch AVR 1100?
- M
  Michelle RamosAug 13, 2025
  If you experience poor collection with your Bosch Lawn Mower, it could be due to raking/verticutting in wet conditions (increase the height of cut), raking/verticutting too low for the conditions (increase the height of cut), possible clogging (check underneath the machine and clear out as necessary, always wear gardening gloves), blocked side grilles (clear debris from the outside of the side grilles), or missing tine springs (for ALR 900 only, replace tine springs, always wear gardening gloves).
B
Brandi JacksonAug 20, 2025
What to do if my Bosch AVR 1100 fails to operate?
- Y
  yudonaldAug 20, 2025
  If your Bosch Lawn Mower fails to operate, several factors could be at play. First, ensure the power is turned on. Check if the mains socket is faulty, and if so, use another socket. Inspect the extension cable for damage and replace it if needed. Also, verify if the fuse is faulty or blown and replace it. Clogging might be the issue, so check underneath the machine and clear any obstructions, wearing gardening gloves. For AVR 1100 models, the motor protector might be activated. If the raking/verticutting is too low, increase the height of cut. Clear any obstruction from the rotor, wearing gardening gloves, and remove any debris from the side grilles. Finally, ensure the grassbox isn't full and empty it regularly.
M
martingeoffreyAug 26, 2025
Why my Bosch Lawn Mower labours or belt squeals?
- K
  Katherine WillisAug 27, 2025
  If your Bosch Lawn Mower labours or the belt squeals, it could be due to the height of cut being too low (increase the height of cut), cutting tines/blades not rotating due to grass obstruction (clear the obstruction, always wear gardening gloves), or a slipping or damaged belt (contact a service agent).
G
Gregory ChavezAug 31, 2025
What causes excessive vibrations/noise in my Bosch AVR 1100 Lawn Mower?
- M
  Matthew SmithAug 31, 2025
  Excessive vibrations or noise in your Bosch Lawn Mower can be attributed to damaged cutting tines or blades. For ALR 900 models, fit a replacement. For AVR 1100 models, contact a service agent.

Bosch AVR 1100 Specifications

General

Type	Push lawn mower
Power	1100 W
Cutting width	320 mm
Cutting system	Rotary blades
Removable tray	Yes
Recommended lawn area	- m²
Grass collecting volume	50 L
Power source	AC
Cordless	No