Bosch B20CS50 Series - Page 39

38
Parts How to check Criterion
Ice dropping motor
2) How to check ice maker
▷ Check resistance between 2 wires
with tester.
▷ GOOD : RS-360RH-14250
: 6 ~ 14Ω
▷ DEFECTIVE :
Change the motor.
I-Sensor
(Ice Sensor)
▷ Check resistance between 2 terminals
with tester.
▷ GOOD : 4.4 ~ 50kΩ
(It depends on ambient temperature)
▷ DEFECTIVE :
Change the sensor.
Full ice
sensing switch
▷ GOOD :
▷ DEFECTIVE :
Change the switch.
Level Switch
Tact Switch
(Blue Circle)
Terminals
(Red Circle)
Tester Result
(Resistance Mode)
Push
Connected
(Close)
0Ω
Normal
Disconnected
(Open)
∞Ω
▷ Check resistance value of 2 terminals
with a Multi Tester.
Tester
Tester
▷ Check resistance value of 2 terminals
with a Multi Tester.