58
8-6. Adjusting F/R Door Balance
※ Top of F/R door is unbalanced horizontally.
(Refer to User Guide and SVC Manual for details.)
Turn the wheels to level refrigerator.
Top of F/R is unbalanced
within 2 mm ?
Open F/R doors and remove front cover
(Unscrew with 3 screws).
Close F/R doors and loosen 3 hinge bolts.
Insert hex wrench into the hinge hole and
turn clockwise (Up) or counterclockwise (Down).
After adjusting door height,
fasten the 3 hinge bolts back.
Open F/R doors again and reassemble front cover.
Top of F/R is unbalanced
within 2 mm ?
Top of F/R is unbalanced
within 2 mm ?
Refrigerator is level ?
Finish
F/R door horizontal
balance is OK.
Start
Detail
Detail
Detail
Detail
N
Y
N
Y
N
Y
Y
N
To Next Page
Loading...
