Bosch B20CS50 Series - Page 68

67
Replacing Freezer Door
1
Insert the water tube into the hole
Of the bottom hinge pin first, then
Insert the bottom of freezer door
Into the bottom hinge pin.
2
Insert the bottom hole of freezer
door straight to the bottom hinge
pin.
3
Let the top of door close to the
cabinet and insert the top hinge
pin to the top hole of freezer door.
( Insert the back of hinge to the
groove of protrusion first, then
front to the top hole of door.)
4
Turn the hinge fastener tightly to
The end.
Connect harness wire and screw
ground wire.
5
Insert the water tube far into the
coupling.
Replacing Refrigerator Door
1
Insert the bottom hole of
refrigerator door straight to the
bottom hinge pin.
2
Let the top of door close to the
cabinet and insert the top hinge
pin to the top hole of refrigerator
door.
( Insert the back of hinge to the
groove of protrusion first, then
front to the top hole of door.)
3
Turn the hinge fastener tightly to
the end.
Connect harness wirings and
screw ground wire.
Click and screw the top hinge
cover.