o Cleanthesurfaceofthe
appliancewithasoftdampcloth
anda littlewashing-upliquid.
Afterwards,rubdry.
o Aftercleaning:reconnectand
switchontheappliance
Cleaning the humidity
filter
Cleaning the water
collecting tray
Spilled water collects in the water
collecting tray.
To empty and clean, remove the
filter. Wipe out water collecting tray
with a sponge or absorbent cloth.
Cleaning the ice cube
container
If ice cubes have not been
dispensed for a prolonged period,
they will shrink, have a stale taste
and stick together.
o Pull out the container, empty
and clean with lukewarm water.
Inserting the ice cube container:
o Push the ice cube container all
the way back onto the supports
until it locks into position.
o If the container cannot be
pushed all the way back, twist
the screw conveyor in the
container.
Ice cube production continues.
LED light
Your appliance features
a maintenance-free LED light.
A full-filled ice cube container is
very heavy. To avoid risk of
injury, use caution when removing
the ice cube container!
Class 1M laser lighting (IEC 60825).
To avoid risk of eye injury, do not
look directly into the lighting with
optical instruments!
These lights may be repaired by
customer service or authorised
technicians only.
o Thoroughly drythe container
and screw conveyor to prevent
new ice cubes from sticking.
24
To Next Page
Loading...
