Installation and connection en-us
7
Niche dimensions
If you install the appliance in a niche, adhere to the
following dimensions:
Ventilation
Never cover or block ventilation openings.
Aligning the appliance
9 CAUTION
■ To avoid damaging the floor, always move the
appliance with the height-adjustable feet
screwed upwards.
■ The two front height-adjustable feet must
always be in contact with the floor to avoid the
appliance from rolling or tipping when the door
is opened.
Rollers are located under the appliance for easy
movement and alignment:
1. Place the appliance vertically on a firm and
leveled floor.
2. Using a wrench, screw down both of the front
height-adjustable feet so that they touch the floor.
3. Compensate for floor unevenness with the front
height-adjustable feet.
Note: To align, use a level.
36
″
(914 mm)
72
″
(1830 mm)
25
″
(635 mm)
13
To Next Page
Loading...
