Bosch BCS71 - Battery Runtimes; Installing the Base Station

Preventing material damage en
17
▶ If these come into contact with the skin, wash immediately with
cold water.
▶ If these come into contact with the eyes, seek medical help.
Preventing material damage
▶ Check and clean any wet objects.
▶ Replace damaged objects.
▶ Regularly check the running surfaces of
the nozzles for wear.
▶ Replace worn nozzles.
▶ Never use the nozzle without the brush
roller in place.
▶ Never operate the appliance without the
filter unit.
Overview
You can find an overview of the parts of
your appliance here.
→Fig. 1
1
Dust container
2
Fluff filter
3
Cartridge filter
4
Power control and on/off switch
5
Status display
6
Dust container release button
7
Storage hook
8
Flexible suction pipe
9
Foot release
10
Universal floor nozzle with free-
standing function
Installing the base station
▶ Check whether any household wiring
could be damaged in the installation
area.
▶ Do not install the base station horizont-
ally or vertically above, below or next to a
socket.
→Fig. 2 - 3
Battery runtimes
You can find an overview of the battery runtimes, depending on the battery that is used,
here.
Notes
¡ The appliance features intelligent battery detection. With 2.50Ah and 3.0Ah batteries
from the Power for ALL 18V series, the appliance is designed for everyday cleaning
tasks. The 4.0Ah Power + battery from the Power for ALL 18V series optimises the ap-
pliance for the runtime. With the 5.0Ah battery in the Power for ALL 18V series, the ap-
pliance is designed for particularly difficult cleaning tasks.
¡ The following modes affect the battery runtime:
 Mode 1: Eco mode with non-electrical accessory
 Mode 2: Eco mode with electrical floor nozzle
 Mode 3: Auto mode with electrical floor nozzle
 Mode 4: Turbo mode with electrical floor nozzle
Runtime 2,5Ah 3,0Ah 4,0Ah Power+ 5,0Ah
Mode1 up to
min.
35 40 45 35
Mode2 up to
min.
25 30 35 30
Mode3 up to
min.
12 15 20 25