Bosch BCS71 - Operation; Cleaning and Servicing; Troubleshooting

en Operation
18
Runtime 2,5Ah 3,0Ah 4,0Ah Power+ 5,0Ah
Mode4 up to
min.
8 10 10 12
Notes
¡ Like every Li-ion battery, the batteries
from the Power for ALL 18V series wear
out over time, meaning that the battery
capacity and the runtime decrease. This
is a natural aging process and not the
result of a material error, manufacturing
error or material defect.
¡ You can delay the natural wear by using
the following measures:
 Only charge the battery in the temper-
ature range between 0°C and 45°C.
 Only store the battery in the temperat-
ure range between -20°C and 50°C.
 Do not store the battery for an exten-
ded period of time if it is fully charged
or fully discharged.
Operation
Installing the appliance
→Fig. 4 - 5
Charging the appliance
▶ Only charge the battery in chargers that
are recommended by the manufacturer.
▶ Only use the battery in connection with
the Bosch appliance.
▶ Charge the battery using the original
charging cable
1
or the original quick
charger
1
.
▶ Only use batteries from the Power for
ALL 18V series.
▶ Ensure that children do not play with the
appliance, even when it is in the base
station
1
.
→Fig. 6 - 10
Operating the appliance
→Fig. 11 - 25
Removing the appliance
→Fig. 26 - 28
Cleaning and servicing
To keep your appliance working efficiently
for a long time, it is important to clean and
maintain it carefully.
Cleaning the appliance
→Fig. 29 - 29
Emptying the dust container
→Fig. 30 - 33
Cleaning the filter unit
▶ Never allow the filters to come into con-
tact with liquids.
→Fig. 34 - 40
Cleaning the floor nozzle
→Fig. 41 - 41
Troubleshooting
▶ Repairs to the appliance should only be
carried out by trained specialist staff.
▶ Only use genuine spare parts when re-
pairing the appliance.
The appliance is not working.
The battery status display does not show
any status.
The battery has not been inserted correctly.
▶ Insert the battery correctly.
The battery has not been charged.
▶ Charge the battery.
The red fault indicator lights up for 10
seconds.
The battery has overheated or overcooled.
1. Switch off the appliance and disconnect
the appliance from the power supply.
2. Wait until battery has reached room
temperature.
1
Depending on the appliance specifications