17
Changing the dust bag en
Replacing the HEPA filter
䡲
Open the dust bag compartment lid
䡲
Unlock the HEPA filter by pushing the locking tab
in the direction of the arrow and remove it from
the vacuum cleaner.
䡲
Insert the new HEPA filter and click it into place.
After vacuuming up fine dust particles, shake
out the motor protection filter to clean it and
replace the micro-hygiene filter, activated
carbon filter or HEPA filter if necessary.
䡲
Always switch the vacuum cleaner off and disconnect the power cord from
the mains before cleaning the vacuum cleaner.
䡲
The vacuum cleaner and plastic accessories can be cleaned with a
commercial plasticcleaner.
Do not use abrasive, glass or all-purpose cleaners.
Never immerse the vacuum cleaner in water.
䡲
The dust compartment can, if necessary, be cleaned with a second vacuum
cleaner or simply wiped with a a dry cloth or dusting brush.
Subject to technical changes.
Care
en
To Next Page
