Why does the pressure reading on the regulated pressure gauge drop when an accessory is used on my Bosch CET4-20 Air Compressor?
It is normal for some pressure drop to occur when an accessory is used with your Bosch Air Compressor. Adjust the regulator accordingly. The cause is that the regulator is not adjusted correctly for the accessory being used.
What to do if my Bosch CET4-20 Air Compressor motor will not run?
If the motor of your Bosch Air Compressor will not run, consider the following potential issues: * Check valve restricted: Remove, clean or replace. * Motor overload protection switch has tripped: Consult Motor Overload information. * Extension cord is wrong length or gauge: Check proper gauge wire and cord length. See Extension Cords information. * Loose electrical connections: Contact a Bosch factory service center or a Bosch authorized service center. * Possible defective motor or starting capacitor: Contact a Bosch factory service center or a Bosch authorized service center. * Paint spray on internal motor parts: Do not operate the compressor in the paint spray area. See flammable vapor warning. * Fuse blown, circuit breaker tripped: Check fuse box for blown fuse and rep...
General| Brand | Bosch |
|---|---|
| Model | CET4-20 |
| Category | Air Compressor |
| Language | English |
To Next Page