Bosch CMG633BS1B - Basic Operation; Switching on the Appliance; Switching off the Appliance; Starting Operation

Basic operation en
13
2.
Wipe the smooth surfaces in the cooking compart-
ment with a soft, damp cloth.
3.
Press ⁠ to switch the appliance on.
4.
Apply the following settings:
Type of heating 4D hot air ⁠
Temperature Maximum
Cooking time 1hour
→"Basic operation", Page13
5.
Press ⁠ to start.
‒ Keep the kitchen ventilated while the appliance is
heating.
a Once the time has elapsed, an audible signal
sounds and the display shows the time as zero.
6.
Press ⁠ to switch the appliance off.
7.
Once the appliance has cooled down, clean the
smooth surfaces in the cooking compartment with
soapy water and a dish cloth.
8.
Clean the accessories thoroughly using soapy water
and a dish cloth or soft brush.
8 Basic operation
8.1 Switching on the appliance
▶
Press ⁠ to switch the appliance on.
a The Bosch logo appears in the display. The types of
heating then appear.
8.2 Switching off the appliance
Switch your appliance off when you are not using it.
The appliance will switch itself off automatically if it is
not used for a certain period of time.
▶
Press ⁠ to switch the appliance off.
a The appliance switches off. Any functions currently
in progress are cancelled.
a The time or residual heat indicator appears in the
display.
8.3 Starting operation
You must start each operation.
ATTENTION!
If there is water on the cooking compartment floor
when operating the appliance at temperatures above
120°C, this will damage the enamel.
▶ Do not use the appliance if there is water on the
cooking compartment floor.
▶ Wipe away any water on the cooking compartment
floor before operation.
▶
Press ⁠ to start.
a The settings, the running time, the display ring and
the heating line appear in the display.
8.4 Pausing or cancelling operation
You can briefly pause operation and then continue. If
you cancel operation completely, the settings will be re-
set.
1.
To pause operation briefly:
‒ Briefly press ⁠.
‒ To continue operation, press ⁠.
2.
To cancel operation completely, press and hold ⁠
for approx. 3 seconds.
a Operation will stop and all the settings will be reset.
8.5 Setting the operating mode
Once you have switched on the appliance, it suggests
an operating mode, e.g. types of heating.
1.
If you want to use a different operating mode to the
one suggested, press the relevant touch field.
a The touch field lights up red.
→"Operating modes", Page10
2.
To implement other settings, press the relevant
touch fields.
3.
Use the control ring to change the values.
4.
Press ⁠ to start.
8.6 Setting the type of heating and
temperature
Requirement:The operating mode "Types of
heating" ⁠ has been selected.
1.
Use the control ring to set the required type of heat-
ing.
2.
Press ⁠.
a The temperature is highlighted in white.
3.
Use the control ring to set the temperature.
4.
Press ⁠ to start.
a The appliance starts heating.
a The target temperature, the time and how long the
appliance has already been in operation are shown
in the display.
5.
When the food is ready, press ⁠ to switch the appli-
ance off.
Tip:The most suitable type of heating for your food
can be found in the description of the type of heating.
→"Types of heating", Page10
Note:You can also set a cooking time and end time on
the appliance.
→"Time-setting options", Page14
Changing the type of heating
When you change the type of heating, the other set-
tings will also be reset.
1.
Press ⁠ to pause operation.
2.
Press ⁠.
a The first type of heating appears in the display with
the corresponding default temperature.
3.
Use the control ring to change the type of heating.
Changing the temperature
Once operation has started, you can change the tem-
perature directly.