Bosch CPA565GS0 - Microwave; Grill; Steam; Childproof Lock

en Familiarising yourself with your appliance
8
Function selector
Use the function selector to set the types of heating and other functions. On some product variants, the function se-
lector can be pushed in. If you turn the function selector from the zero setting to a function, it takes a few seconds for
the relevant function to be available.
Symbol Setting Use
Zero setting The appliance is switched off and is
in energy-saving mode.
Microwave Select microwave operation.
Steam Hot steam is fed into the cooking
compartment.
Hot air The fan distributes the heat from the
ring-shaped heating element in the
back wall evenly around the cooking
compartment.
Grill The entire area below the grill ele-
ments becomes hot.
Hot air grill The fan circulates the hot air from the
grill elements around the food.
Descale This function descales the evaporator
and ensures it remains fully function-
ing.
Rinse The pipes in the steam unit are
rinsed with water. We recommend
using the rinsing function after every
steam operation.
Programmes This gives you access to prepro-
grammed settings for many dishes.
Touch fields
Touch fields are touch-sensitive surfaces. To select a function, touch the relevant field.
Symbol Touch field Use
Microwave Select the microwave power levels or
switch on the microwave function for
grilling or steaming.
Steam Select a steam setting or switch on
the steam function for a type of heat-
ing.
Programmes Call up the programme selection and
use the rotary selector to set the pro-
gramme number.
Time-setting options Select the "Time-setting options" sym-
bol and use the rotary selector to set
the time-setting options you require.
Rapid preheating/childproof lock Press briefly: Activate/deactivate
rapid preheating.
Press and hold: Activate or deactiv-
ate the childproof lock.
Temperature/weight Use the rotary selector to select and
set the temperature or weight.
Start/stop Start or pause the operation.
Display
You can see the current setting values or options in the
display.
The value that you can currently set is highlighted.
It is highlighted by a red bar displayed below the set
value.
You can use the rotary selector to change the high-
lighted value directly.