Bosch D1260 Series - User Manual

To Next Page

Intrusion Systems | D1260 Series LCD Keypads

Each D1260 Series Keypad model is an SDI bus

compatible device that works with G Series Control

Panels. Each keypad model has an illuminated keypad, a

bright four-line by 20-character English language liquid

crystal display (LCD), and a sounder that emits eight

warning tones.

Note

The D1260 Series Keypads are available

exclusively to Bosch Certified Security

Dealers (BCSD).

Functions

LCD Display

Every D1260 Series Keypad model uses words, numbers,

and symbols to show the status of the security system.

When several events occur, each model shows each

event in order of priority.

Keys

Each D1260 Series Keypad model has 10 numeric keys,

two function keys, and eight soft keys. Use the

[COMMAND] key in combination with numeric keys to

perform a function. Use the [ENTER] key to enter your

passcode. Use the eight soft keys to select a menu and

associated functions.

Audible Tones

The sounder emits eight distinct warning tones. You can

adjust the volume. You can also use a passcode to

silence the tone.

The tones include:

•

Burglary Signal: Steady high-pitched bell tone during

alarm.

•

Fire Signal: Pulsed high-pitched bell tone during fire

alarm.

•

Entrance Warning: Intermittent beep tones during

entry delay periods.

•

Exit Warning: Intermittent beep tones during exit

delay periods.

•

Invalid Key Buzz: Buzz tone when an invalid key is

pressed.

•

Keypad Encoding Tone: Muted beep tone as each key

is pressed.

•

Trouble Buzzer: Two-tone warble during a trouble

event.

•

Watch Tone: Intermittent beep tone when a watch

point is faulted.

D1260 Series LCD Keypads

▶

Integrated user Help windows to simplify operation

▶

Illuminated four-line display

www.boschsecurity.com

National Security Systems Inc (800)457-1999

Need help?

Do you have a question about the Bosch D1260 Series and is the answer not in the manual?

Overview

Function Description
Important Technical Specifications
Certifications and Approvals
Power Requirements
Keypad Dimensions
Indicators
Material
Connections
Display Screen
Environmental Considerations
Compatibility
Usage Features
Maintenance Features
Mounting Considerations
Power Supplies
Wiring Considerations

The D1260 Series LCD Keypads are SDI bus-compatible devices designed to work with G Series Control Panels. Each keypad features an illuminated keypad, a bright four-line by 20-character English language liquid crystal display (LCD), and a sounder that emits eight distinct warning tones. These keypads are exclusively available to Bosch Certified Security Dealers (BCSD).

Function Description

The D1260 Series Keypads serve as the primary interface for users to interact with and monitor their security system. The LCD display uses words, numbers, and symbols to show the current status of the security system. In situations where multiple events occur simultaneously, the keypad prioritizes and displays each event in order of importance.

The keypad includes 10 numeric keys, two function keys, and eight soft keys. The [COMMAND] key, when used in combination with numeric keys, allows users to perform various functions. The [ENTER] key is used to input passcodes. The eight soft keys provide access to menus and their associated functions, simplifying navigation and operation. The integrated user Help windows further enhance usability by providing on-screen assistance.

The sounder emits eight distinct warning tones, and its volume can be adjusted. Users can also silence the tones using a passcode. The specific tones include:

Burglary Signal: A steady, high-pitched bell tone during an alarm event.
Fire Signal: A pulsed, high-pitched bell tone during a fire alarm.
Entrance Warning: Intermittent beep tones during entry delay periods.
Exit Warning: Intermittent beep tones during exit delay periods.
Invalid Key Buzz: A buzz tone indicating an invalid key press.
Keypad Encoding Tone: A muted beep tone that sounds with each key press.
Trouble Buzzer: A two-tone warble indicating a trouble event.
Watch Tone: An intermittent beep tone when a watch point is faulted.

Important Technical Specifications

Certifications and Approvals:

The D1260, D1260B, D1260BLK, D1260R, and D1260W models are certified under:

UL1076 Proprietary Alarm Units
UL864 Control Unit Accessories, System
UL1610, UL1635 Central Station Alarm Units
UL985 Control Units and Accessories-Household System Type
UL1023 Household Burglar Alarm System Units
UL609, Local Alarm Units
UL365, Police Station Alarm Units The D1260 model specifically holds CSFM certification.

Power Requirements:

Voltage: Nominal 12 VDC
Standby Current: Idle 200 mA, Maximum 250 mA (with sounder and display backlight at maximum)

Keypad Dimensions:

D1260, D1260W, D1260R, D1260BLK: 10.9 cm x 20 cm x 2.6 cm (4.3 in. x 7.9 in. x 1 in.)
D1260B: 12.6 cm x 20.9 cm x 3.2 cm (5 in. x 8.2 in. x 1.3 in.)
Weight for All Models: 439 g (15.5 oz)

Indicators:

Illuminated keys
Warning and indicating tones

Material:

D1260, D1260W, D1260R, D1260BLK: GE CYCOLOY® C1110, UL94-HB Fire Rated
D1260B: CHI MEI POLYLAC PA-757 with UV Stabilizer, UL94-HB Fire Rated

Connections:

Type: 4-wire flying lead for data and power
Resistance: 14 Ω maximum

Display Screen:

Type: Backlit LCD
Size: 8.6 cm x 3.6 cm (3.4 in. x 1.4 in.), 4 lines x 20 characters

Environmental Considerations:

Humidity: 95% ±2% at 49°C (120°F)
Operating Temperature: 0°C to +49°C (+32°F to +120°F)
Use: Intended for indoor use

Compatibility:

Control Panels: D9412G, D7412G, D7212G, D9412, D7412, D7212, and D9112 with firmware versions 6.40 or higher.
Keypads per Control Panel: 8 supervised, 32 unsupervised

Usage Features

The D1260 Series Keypads offer a user-friendly interface with an illuminated four-line display that provides clear status information. The soft keys and integrated Help windows simplify system operation, making it accessible for various users. The adjustable volume for warning tones and the option to silence them with a passcode provide flexibility in managing audible alerts.

Maintenance Features

Mounting Considerations:

Keypads should not be mounted in direct sunlight, as this can interfere with screen visibility and potentially damage internal components.
Keypads should not be mounted in damp locations.

Power Supplies:

The control panel provides power and data to the keypad via a simple four-wire connection. To determine if an additional power supply is required, users should consult the operation and installation manual for the specific control panel and refer to the current rating chart for standby battery calculations.

Wiring Considerations:

Use 1.2 mm (18 AWG) or 0.8 mm (22 AWG) wire.
Wiring resistance must not exceed 14 Ω.
Each D1260 Series Keypad model includes a wiring assembly consisting of four color-coded flying leads and one female four-pin connector, simplifying installation.