12 en | Diagrams
2016.07 | 04 | F.01U.291.483 UL Installation Guide Bosch Security Systens, Inc.
3.2 Power Supply Side Wiring Diagrams
3.2.1 D9412GV4/D7412GV4 v2.00 (and higher) Power Supply Side System
(D113, D122/D122L, D192G, D928, D1640, D8132) Wiring Diagram (Power
and Phone)
Figure3.5: Side System Wiring Diagram
Callout - Description Callout - Description
1 - If required by local AHJ, connect D113
Battery Lead Supervision Module.
8 - To Output A or Output B
2 - Batteries 9 - Listed Audible Signaling Devices rated at 12.0 VDC nominal
(do not use vibrating type horns)
3 - D122/D122L Dual Battery Harness, as
required
10 - C900V2 (optional)
4 - To Supervision Point 11 - Secondary phone line (part of D928)
5 - D1640 Transformer (NFPA applications may
require the use of a D8004 Transformer
Enclosure
12 - 560 Ω, 2 W end-of-line (EOL) Resistor (P/N: 15-03130-005)
6 - D8132 Dual Battery Charger with two
batteries (Batteries are not supervised.)
13 - D928
7 - D192G Bell Supervision Module 14 - To earth ground
To Next Page
Loading...
