28 en | Power Supply and Power Outputs
2016.07 | 04 | F.01U.291.483 UL Installation Guide Bosch Security Systens, Inc.
Verification/Reset Output
The default program sets Output C (Terminal 8) as a verification and reset output. Refer to
Output Parameters and Point Assignments in the D9412GV4/D7412GV4 v2.02 Program Entry
Guide (P/N: F01U265459) for instructions on programming verification/reset outputs and
points.
Performing a sensor reset at a keypad produces a five-sec activation of reset outputs. The
control panel ignores verification and reset points during the five-sec activation.
To Next Page
Loading...
