Cleaning and servicing en
33
Odour filter for recirculating
air mode
Odour filters bind odorous sub-
stances in air recirculation mode.
Regularly replaced odour filters guar-
antee a high level of odour removal.
With normal use (approx.onehour a
day), the odour filter must be re-
placed every 4 months. The odour
filter cannot be cleaned or regener-
ated.
You can obtain odour filters from the
after-sales service or the online shop.
Only use original odour filters.
Removing odour filter
Requirement:The grease filters have
been removed.
→"Removing the grease filter",
Page31
▶
Rotate the old odour filters and re-
move them from the holder.
Fitting odour filters
1. Push the new odour filters onto the
holder and rotate.
2. Fit the grease filters.
→"Fitting grease filters", Page32
Odour filter for the CleanAir
recirculation module
You can use your appliance with a
CleanAir air recirculation module. The
installation instructions enclosed de-
scribe how to replace the corres-
ponding odour filter.