MY20B01-22_1.0_21.06.2019
2
Contents
4.1.2 Transport weight 36
4.1.3 Designated handles/lifting points 36
4.2 Transportation 36
4.2.1 Transporting the battery 37
4.2.2 Shipping the battery 37
4.2.3 Using the brake transport securing
system 37
4.3 Storing 37
4.3.1 Break in operation 38
4.3.1.1 Preparing a break in operation 38
4.3.1.2 Taking out of operation 38
5 Assembly 39
5.1 Required tools 39
5.2 Unpacking 39
5.2.1 Scope of delivery 39
5.3 Commissioning 40
5.3.1 Checking the battery 40
5.3.2 Installing the wheel in the Suntour fork 40
5.3.2.1 Installing the wheel with screw-on axle
(15 mm) 40
5.3.2.2 Installing the wheel with screw-on axle
(20 mm) 41
5.3.2.3 Installing the wheel with a quick release
axle 42
5.3.3 Installing the wheel with a quick release 43
5.3.4 Installing the wheel in the FOX fork 44
5.3.4.1 Wheel with quick release (15 mm) 44
5.3.4.2 Adjusting the FOX quick release 45
5.3.4.3 Installing the wheel with Kabolt axles 45
5.3.4.4 Checking the stem and handlebars 45
5.3.5 Pedelec sale 46
6Operation 47
6.1 Risks and hazards 47
6.1.1 Tips for a greater range 48
6.1.2 Personal protective equipment 48
6.2 Error messages 49
6.2.1 Error message display 49
6.2.2 Battery error message 51
6.3 Before the first ride 52
6.3.1 Adjusting the saddle 52
6.3.1.1 Adjusting the saddle tilt 52
6.3.2 Determining the seat height 52
6.3.2.1 Adjusting the seat height with quick
release 52
6.3.2.2 Height-adjustable seat post 53
6.3.2.3 Adjusting the seat position 53
6.3.3 Adjusting the handlebars 54
6.3.3.1 Adjusting the stem 54
6.3.3.2 Adjusting the height of the handlebars 54
6.3.3.3 Turning the handlebars to the side 54
6.3.3.4 Checking the clamping force in quick
releases 55
6.3.3.5 Adjusting the quick release clamping
force 55
6.3.4 Adjusting the brake lever 55
6.3.4.1 Adjusting the pressure point on a
Magura brake lever 55
6.3.4.2 Adjusting the grip distance 55
6.3.4.3 Adjusting the grip distance on a
Magura brake lever 56
6.3.5 Adjusting the suspension of the
Suntour fork 56
6.3.5.1 Adjusting the negative deflection 56
6.3.5.2 Adjusting the air suspension fork
negative deflection 57
6.3.5.3 Adjusting the steel suspension fork
negative deflection 57
6.3.5.4 Adjusting the rebound 58
6.3.6 Adjusting the suspension of the
FOX fork 58
6.3.6.1 Adjusting the negative deflection 58
6.3.6.2 Adjusting the rebound 59
6.3.7 Setting the Suntour rear frame damper 60
6.3.7.1 Adjusting the negative deflection 60
6.3.7.2 Adjusting the rebound 60
6.3.7.3 Setting the compression 60
6.3.8 Setting the FOX rear frame damper 61
6.3.8.1 Adjusting the negative deflection 61
6.3.8.2 Adjusting the rebound 61
6.3.9 Retracting the brake linings 62
6.4 Accessories 63
6.4.1 Child seat 63
6.4.2 Bicycle trailers 64
6.4.3 Pannier rack 64
6.5 Before each ride 65
6.6 Check list before each ride 65
6.7 Using the kickstand 66
6.7.1 Raising the kickstand 66
6.7.1.1 Parking the pedelec 66
6.8 Using the pannier rack 66
6.9 Rechargeable battery 67
6.9.1 Frame battery 68
6.9.1.1 Removing the frame battery 68
6.9.1.2 Inserting the frame battery 68
6.9.2 Pannier rack battery 68
6.9.2.1 Removing the pannier rack battery 68
6.9.2.2 Inserting the pannier rack battery 68
6.9.3 Integrated battery 68
6.9.3.1 Removing the integrated battery 68
6.9.3.2 Inserting the integrated battery 69
6.9.4 Charging the battery 69
6.9.5 Charging the dual battery 70
6.9.5.1 Charging process when two batteries
are used 70
To Next Page
Loading...
