en-us Environmental protection and energy-saving
8
4.4 Sensors
The sensors adjust the cycle sequence and strength in the
Auto cycles depending on the level and type of soiling.
The sensor has different sensitivity levels that can be
changed in the basic settings.
→
"Changing the basic settings", Page32
Sensor setting Description
Standard Optimal setting for mixed loads
and heavily soiled dishware.
Saves both energy and water.
Sensitive Adjusts the cycle strength for
effective removal of food
remnants even with low soiling
levels. Energy and water
consumption are adjusted
accordingly.
Very sensitive Adjusts the cycle strength for
difficult conditions of use, e.g.
stubborn dried-on food remnants.
Recommended setting when
using organic or ecological
detergents containing low levels
of active agents. Energy and
water consumption are adjusted
accordingly.
To Next Page
Loading...
