To Next PageTo Next Page
Need help?Do you have a question about the Bosch DNM 60 L and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | DNM 60 L |
| Category | Laser Level |
| Language | English |
Details the purpose of the measuring tool for quick and precise measurement of inclinations and angles.
Lists and describes the numbered components and parts of the measuring tool.
Details the various elements displayed on the tool's screen, including aids, readings, and indicators.
Instructions on how to correctly insert or replace the battery in the measuring tool, including precautions.
Provides essential initial steps and precautions for operating the measuring tool safely and correctly.
Details how to turn the measuring tool on and off, and its auto-off function for battery saving.
Explains how to check the measuring tool's accuracy before use, after temperature changes, or impacts.
Step-by-step guide to calibrate the measuring tool for horizontal surfaces, involving specific rotations and checks.
Step-by-step guide to calibrate the measuring tool for vertical surfaces, involving specific rotations and checks.
Explains how to switch between units of measure (° , % , mm/m) using the dedicated button.
Details how to switch the acoustic signal on/off and its function for indicating 0° and 90° readings.
Describes how display indicators guide the user in turning the tool to reach horizontal or vertical planes.
Explains the display's ability to rotate readings by 180° for overhead work, depending on tool position.
Details the 'Hold' and 'Copy' functions controlled by the HOLD/COPY button for retaining or transferring readings.
Provides instructions on proper care, cleaning, storage, and transport of the measuring tool.
Lists available spare parts for the measuring tool, such as battery lid, closing cap, and protective case.
Provides contact information and resources for service, customer support, and obtaining spare parts.
