To Next PageTo Next Page
Need help?Do you have a question about the Bosch EasySaw 18V-70 and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| Battery Type | Lithium-Ion |
| Saw Type | Reciprocating Saw |
| Stroke Length | 20 mm |
| Weight | 1.8 kg (without battery) |
| Cutting Depth in Wood | 70 mm |
| Cutting Depth in Steel | 8 mm |
| Battery Compatibility | Bosch 18V batteries |
| No-load Stroke Rate | 0 - 3, 000 spm |
Read all safety warnings, instructions, and specifications for safe operation.
Keep the work area clean and well lit to prevent accidents.
Ensure proper electrical connections and avoid contact with earthed surfaces.
Stay alert, use common sense, and wear protective equipment.
Use correctly, maintain tools, and avoid forcing them.
Handle batteries carefully, recharge properly, and avoid damage.
Have power tools serviced by qualified personnel with identical parts.
Specific safety advice for operating jigsaws to prevent injury.
Specifies the tool's purpose for making cuts in various materials with angles.
Lists and identifies the various components and parts of the power tool.
Provides key specifications like article number, voltage, stroke rate, and cutting depths.
Details noise and vibration emission values measured according to standards.
Instructions on how to prepare the tool for use, including battery removal.
Guidance on charging the lithium-ion battery using the correct charger.
Explains the function of the LED indicators for battery charge status.
Covers selecting, inserting, removing, and storing saw blades.
Explains the Cut Control accessory for precise guiding along cutting lines.
Instructions on connecting dust extraction systems and using accessories.
General guidance on using the tool and removing the battery.
How to set the base plate for angled cuts up to 45 degrees.
Using Cut Control marks for precise mitre cutting.
Adjusting the base plate for sawing close to edges.
Instructions on inserting the battery and switching the tool on/off.
Steps to correctly insert the charged battery into the tool.
How to operate the lock-off switch and the on/off switch.
Adjusting the tool's speed based on material and work conditions.
Explains how the tool protects itself from overheating or overload.
General tips for safe and effective operation, including workpiece handling.
Procedures for keeping the tool clean and in good working order.
Information on obtaining spare parts and technical support.
Contact information and advice for product service and application support.
Guidelines for road transport of lithium-ion batteries without special permits.
Advice on optimal battery handling and proper disposal procedures.
Statement confirming product compliance with EU directives and standards.
Statement confirming product compliance with UK regulations and standards.
