72
FOR THE INSTALLER
Commissioning report
Client / Installation address:
Installer:
Type of equipment:
Commissioning date: Serial number:
Type of heat (soil heat, rock heat, other...):
Total length of collector:
Other components of the installation:
Additional heat
..............................................
Room sensor T5 (GT5)
Hot water heater type
..............................................
Hot water heater temperature sensor T3
(GT3)
Three-way valve
..............................................
Mixing valve sensor T4 (GT4)
Others: .....................................................................................................................................................................................................................
Points to be checked prior to commissioning
Heating system (pressure,
venting):
fi lled
checked
Notes: ......................................................
HTF collector system (pressure,
venting):
fi lled checked
Notes: ......................................................
Electric cassette:
planned checked
Notes: ......................................................
Particle fi lter:
checked cleaned
Notes: ......................................................
Sight glass:
checked
Notes: ......................................................
Temperatures after 10 minutes heating or hot water mode:
Heat carrier out T8 (GT8): ............./..............˚C Heat carrier in T9 (GT9): ............./..............˚C
HTF collector in T10 (GT10): ........../...........˚C
HTF collector out T11 (GT11): ........../...........˚C
Heat carrier pump G2 (P2) working correctly:................ HTF pump G3 (P3) working correctly:................
To Next Page
Loading...