EasyManua.ls Logo

Bosch EHP 8.5 AA/I User Manual

Bosch EHP 8.5 AA/I
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Bosch Compress 8000 AA
EHP 8.5
SUOMI NORSKENGLISH SVENSKA DANSK
LUFT/LUFT-VARMEPUMPE
INSTALLASJONSMANUAL
SPLIT AIR/AIR HEAT PUMP
INSTALLATION MANUAL
SPLIT-TYYPPINEN
ILMALÄMPÖPUMPPU
ASENNUSOHJEET
LUFTVÄRMEPUMP
INSTALLATIONSHANDLEDNING
LUFT/LUFT-VARMEPUMPE
INSTALLATIONSMANUAL
Use New refrigerant R410A
Bruk nytt kjølemiddel R410A
Käytä uutta kylmäainetta R410A
Använder nytt köldmedel R410A
Brug nyt kølemiddel R410A
EHP8.5AA_final all.indd 1 2016/1/8 14:47:42
Question and Answer IconNeed help?

Do you have a question about the Bosch EHP 8.5 AA/I and is the answer not in the manual?

Bosch EHP 8.5 AA/I Specifications

General IconGeneral
BrandBosch
ModelEHP 8.5 AA/I
CategoryAir Conditioner
LanguageEnglish

Summary

Bosch Compress 8000 AA EHP 8.5

Use New Refrigerant R410A

Specifies the use of new refrigerant R410A for the unit.

Split Air/Air Heat Pump Installation Manual

Installation guide for the split air-to-air heat pump system.

Safety Precautions

General Safety Guidelines

Essential safety measures for installation and operation.

Included Accessories

Lists and describes the parts included for installation.

Installation Location Notes

Recommendations for optimal placement of indoor and outdoor units.

Piping Specifications

Details on pipe size, length, and height difference limits.

Drain Hose Connection

Instructions for connecting and routing the drain hose.

Mounting Plate and Piping Hole

Mounting Plate Installation

Steps for positioning and securing the mounting plate to the wall.

Piping Hole Preparation

Instructions for drilling the wall hole and fitting the sleeve.

Indoor Unit Setup

Piping Route Selection

Guidance on cutting the panel for different piping routes.

Mounting Indoor Unit

Procedures for attaching the indoor unit to the mounting plate.

Panel Cover Management

Instructions for removing and attaching the unit's panel cover.

Detaching Indoor Unit

Steps to safely remove the indoor unit from its mounting.

Indoor Unit Cable Connection

Electrical Cable Connection

Detailed steps for connecting the power and communication cables.

Connecting the Drain Hose

Drain Hose Installation

Instructions for attaching and securing the drain hose.

Drainage System Check

Procedure to verify the drain hose is functioning correctly.

Outdoor Unit Installation

Securing Outdoor Unit

Steps to securely fasten the outdoor unit using bolts.

Refrigerant Pipe Connection

Pipe Flaring Procedure

Detailed steps for preparing the pipe ends for connection.

Connecting and Tightening Pipes

Instructions for connecting pipes and specified torque values.

Air Removal (Vacuuming)

Vacuuming Procedure

Steps for removing air and moisture from the refrigerant circuit.

Outdoor Unit Cable Connection

Power and Communication Wiring

Instructions for connecting electrical cables to the outdoor unit.

Power Cabling Requirements

Dedicated Power Supply and Switch

Requirements for a dedicated power circuit and disconnect switch.

Remote Control Mounting

Mounting Options

Methods for attaching the remote control or its holder.

Test Run and Checks

Performing Test Run

Steps to initiate cooling or heating test run modes.

Pre-Operation Checklist

Items to verify before and after installation.

Pump Down Procedure

Refrigerant Collection

Steps to collect refrigerant into the outdoor unit for removal.

Related product manuals