Need help?Do you have a question about the Bosch extractor hood and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | extractor hood |
| Category | Ventilation Hood |
| Language | English |
Guidance on proper disposal of packaging and old appliances to minimize environmental impact.
Essential steps and safety checks before operating the appliance for the first time.
How to identify and resolve common operational faults and error displays on the appliance.
Defines correct usage and safety precautions for users, including children, to prevent injury.
Covers appliance condition checks, power cord safety, and installation by qualified technicians.
Warns about potential poisoning risks when the hood operates with certain heating appliances.
Specific safety guidelines for installing above gas hobs, including distances and heat risks.
Instructions for initial cleaning, bulb handling, and operating with hotplates to prevent damage.
Minimum clearance distances, width matching, and restrictions for installing over solid fuel appliances.
How the extractor removes air to the exterior via a pipe system for ventilation.
How the extractor recirculates air back into the kitchen after filtering odours and grease.
Procedures for changing between exhaust and recirculating air modes via the control panel.
Explanation of the buttons and indicators for light, fan speed, and fan follow-on functions.
Steps for turning the fan on/off, adjusting speed levels, and using intensive/follow-on modes.
How to control the hood's lighting and interpret signals for saturated filters.
Instructions for enabling or disabling the audible feedback signals for button presses.
Guidelines for safely cleaning the hood's exterior surfaces and controls without causing damage.
How to clean grease filters to prevent fire risk and maintain optimal performance.
Step-by-step instructions for removing and reinstalling the metal-mesh grease filters.
Guidance on installing, removing, and replacing activated carbon filters for odour binding.
Detailed steps for safely changing hot halogen bulbs, including necessary cooling time.
Instructions for replacing filament bulbs, ensuring correct type and equivalent power.
Requirements for conveying exhaust air, pipe diameter, and avoiding restrictions for optimal performance.
Details on connecting exhaust pipes, recommended diameters, and considerations for flat ducts.
Safety and technical requirements for connecting the extractor hood to the mains power supply.
Steps to prepare the ceiling, check for obstructions, and ensure a level surface for mounting.
Instructions for mounting the adjustable upper support frame onto the ceiling structure.
Steps for attaching the lower part of the support frame to the upper section for stability.
How to safely hook and fasten the main extractor hood unit to the installed support frame.
Guides on separating, preparing, and attaching the upper and lower flue duct components.
Shows and names specific accessory kits for the extractor hood, DHZ5265 and DHZ5285.
To Next Page