What to do if N, M and O are all flashing on my Bosch Kitchen Appliance?
If N, M, and O are all flashing simultaneously and no water can be drawn, it indicates a fault with the appliance. Disconnect the Bosch Kitchen Appliance from the power supply and contact Customer Service.
Why is my Bosch Kitchen Appliance not working and no lights are on?
If your Bosch Kitchen Appliance isn't working and no control lights are on, it might not be getting power. Check to ensure the appliance is properly connected to the power supply.
Why is my Bosch Kitchen Appliance machine running but not producing water?
If your Bosch Kitchen Appliance is running but not producing water, there could be several reasons: * The water tank might not be correctly fitted; ensure it is properly in place. * The water tank may have been removed during brewing, or there might be air in the system; try drawing the water again. * The float in the water tank could be stuck; clean the water tank and release the float.
What to do if the water splutters when drawn from my Bosch Kitchen Appliance?
If the water splutters when drawn from your Bosch Kitchen Appliance: * The cup stand might be set too low; raise it to reduce the distance between the water outlet and the cup. * There could be a build-up of limescale in the water outlet; descale the appliance.
Why does N light up after only a few drawing cycles on my Bosch Kitchen Appliance?
If the 'N' light illuminates after only a few drawing cycles on your Bosch Kitchen Appliance, it may indicate a possible operating error. Descale the appliance.
Why is the temperature of the water drawn from my Bosch Kitchen Appliance too low?
If the water temperature from your Bosch Kitchen Appliance is too low, the set temperature may be displaying the water temperature directly at the water outlet. Try selecting a higher temperature.
Why is N lighting up even though a filter has been used in my Bosch Kitchen Appliance?
Even when using a filter, the 'N' light may illuminate on your Bosch Kitchen Appliance because filtered water still contains low amounts of calcium carbonate. Descale the appliance.
Why does N light up even though my Bosch Kitchen Appliance has just been descaled?
If the 'N' light illuminates on your Bosch Kitchen Appliance immediately after descaling, the descaling program might have been interrupted due to insufficient water or a power failure. Redo the descaling program.
How to fix loud cooking noises during water drawing from my Bosch Kitchen Appliance?
Loud cooking and pumping noises during water drawing from your Bosch Kitchen Appliance may occur if: * The filter is set to “yes” but there is no filter in place. Descale the appliance. * There is a build-up of limescale in the appliance. Program the correct setting.
Why is it not possible to set the temperature on my Bosch Filtrino THD20?
If you cannot set the temperature on your Bosch Kitchen Appliances, the child-proof lock may be activated. Deactivate the child-proof lock.
Turns the appliance on or off. Indicator lights briefly when switched on.
Press to dispense water. Press again to cut off water supply early.
Select desired water temperatures using the temp. set button.
Explains the meaning of various indicator icons on the appliance.
Provides general information on using the appliance for filtering and dispensing water.
Instructions for initial setup, including cleaning and filter insertion.
Instructions for dispensing water at the desired temperature and quantity.
Adjusts the cup stand height for different cups and glasses.
Allows customization of the dispensed water volume.
Activates or deactivates the child lock feature for safety.
Covers cleaning the appliance and its parts for optimal performance.
Guidelines for environmentally friendly disposal of the appliance.
General| Brand | Bosch |
|---|---|
| Model | Filtrino THD20 series |
| Category | Kitchen Appliances |
| Language | English |
To Next Page
