Need help?Do you have a question about the Bosch GBH 2-24 DS and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | GBH 2-24 DS |
| Category | Rotary Hammer |
| Language | English |
Protective cover for the tool holder, should be replaced if damaged.
Component used for securing or releasing tools in the tool holder.
Ensures proper ventilation and heat dissipation for the motor.
Adjustable depth stop for precise drilling depth.
Provides additional grip and control for safe operation.
Used to release or adjust components, such as the mode selector.
Allows selection of drilling, hammer drilling, or chiseling modes.
Controls the direction of rotation, primarily for unscrewing.
Primary control for starting and stopping the tool.
Safety feature that allows for continuous operation.
Essential safety precautions and pre-operation checks for secure use.
Ensuring the correct supply voltage and condition of the power cord.
Guidance on using the ON/OFF switch, interlock, and speed control.
Information on the SDS-plus tool system, including insertion and removal.
How to select and set the drill's operating modes (Drilling, Hammer Drilling, Chiseling).
Using the reversing switch for rotation direction and bolting procedures.
Guide for selecting appropriate speeds and modes based on application.
Explanation of dust extraction benefits and the Saugfix accessory.
Proper use and adjustment of the auxiliary handle for optimal positioning.
Setting the tool mount to 36 positions for chiseling.
Instructions for sharpening chisels to maintain efficiency and tool life.
Instructions for keeping the machine and ventilation slots clean.
Procedure for replacing a damaged dust protection cap.
Important instructions for connecting a new 3-pin plug to the cable.
Guidance on authorized service agents for repairs and spare parts.
Information on measured noise and vibration levels and the need for ear protection.
Maintaining a clean work area and avoiding hazardous environments.
Measures to prevent contact with grounded surfaces and ensure electrical safety.
Proper use of tools, dress code, safety glasses, and cord care.
Techniques for securing the workpiece and maintaining alertness during operation.
Importance of tool maintenance, checking for damaged parts, and avoiding unintended starts.
Table listing various SDS-plus drill bit dimensions (D, L1, L2) and order numbers.
List of SDS-plus accessories with dimensions and order numbers.
Details on controller and vacuum attachment set (Saugfix-Set).
Information on the SDS-plus compatible carrying case.
To Next Page
