To Next PageTo Next Page
Need help?Do you have a question about the Bosch GBH 2-26 DRE and is the answer not in the manual?
General| Input power | 800 W |
|---|---|
| Power source | AC |
| Impact rate | 4000 bpm |
| Rated speed (max) | 900 RPM |
| Impact energy (max) | 2.7 J |
| Drilling diameter in wood (max) | 30 mm |
| Drilling diameter in steel (max) | 13 mm |
| Vibration level (hammer drilling) | 17.5 m/s² |
| Drilling diameter in concrete (max) | 26 mm |
| Optimum drilling diameter (concrete) | 8 - 16 mm |
| Reverse | Yes |
| Chuck type | SDS Plus |
| Uncertainty coefficient (concrete) | 1.5 m/s² |
Weight and Dimensions| Depth | 377 mm |
|---|---|
| Width | 83 mm |
| Height | 210 mm |
| Weight | 2800 g |
Ensures a safe working environment by maintaining cleanliness and proper lighting.
Guidelines for safe use of power tools regarding electricity, including plugs and cords.
Advises on staying alert, using protective equipment, and proper attire for safe operation.
Instructions for proper usage, maintenance, and safe handling of power tools.
Emphasizes the need for hearing protection to prevent noise-induced hearing loss.
Stresses the importance of using the auxiliary handle for better control and safety.
Recommends using detectors to locate hidden utility lines before drilling.
Advises on securely clamping workpieces for safe and controlled operation.
Lists and describes the various components and features of the power tool.
Instructions for attaching and adjusting the auxiliary handle for optimal use.
Procedure for changing the key type drill chuck on the power tool.
Steps for correctly mounting the key type drill chuck onto the tool.
Guide on inserting the key type drill chuck with adapter shank into the tool holder.
Steps for safely removing the key type drill chuck from the tool holder.
Detailed instructions for replacing the quick change chuck on the GBH 2-26 DFR.
Procedure for inserting SDS-plus drilling tools into the tool holder for easy changing.
Steps to remove SDS-plus drilling tools from the tool holder.
Guide for inserting non-SDS-plus tools into specific models of the power tool.
Steps for removing non-SDS-plus tools from specific models of the power tool.
How to insert non-SDS-plus tools into the GBH 2-26 DFR model.
How to remove non-SDS-plus tools from the GBH 2-26 DFR model.
Information on using the dust extraction attachment as an accessory.
Instructions for attaching the dust extraction accessory to the tool.
Important checks and precautions before starting the power tool.
How to select the operating mode using the mode selector switch.
Instructions on how to change the rotational direction of the tool.
Guidance on how to start, stop, and lock the power tool's switch.
How to adjust the speed and impact rate of the tool by varying the trigger pressure.
How to set and lock the chisel into 36 different positions for optimal chiseling.
Steps for inserting screwdriver bits using a universal bit holder.
