To Next PageTo Next Page
Need help?Do you have a question about the Bosch GBH 5-38 D and is the answer not in the manual?
General| Power Input/Consumption | 1, 050 W |
|---|---|
| Weight | 5.4 kg |
| Drilling Capacity in Concrete | 38 mm |
| Drilling Capacity in Steel | 13 mm |
| Drilling Capacity in Wood | 30 mm |
| Drilling diameter in concrete with core cutters | 68 mm |
| Toolholder | SDS max |
Diagram illustrating the GBH 5-38 D and GBH 500 with key numbered parts for easy reference.
Ensuring a clean, well-lit workspace and proper electrical connections to prevent accidents and shocks.
Guidelines for operator alertness, protective gear, preventing accidental starts, and maintaining stability during use.
Instructions for correct tool operation, regular maintenance, keeping cutting tools sharp, and using accessories.
Recommendations for using hearing protection and auxiliary handles, and awareness of hidden wiring hazards.
Details the machine's intended applications, primarily hammer drilling in concrete, brick, and stone, and chiselling.
Comprehensive technical data including article number, rated power, speed, impact rate, and dimensional specifications.
Measured noise and vibration emission data according to EN 60745, with advice on hearing protection.
Instructions for fitting the auxiliary handle, changing SDS-max tools, and the function of the dust protection cap.
Guidance on correctly starting the machine, selecting operating modes, and switching the tool on and off.
Details on adjusting chiselling positions (Vario-Lock), the safety clutch function, and general working advice.
Instructions for cleaning the machine, lubrication requirements, and when to seek professional service or repair.
Information on contacting Bosch for after-sales service, application support, and ordering spare parts.
Instructions for the proper and environmentally friendly disposal of the power tool, accessories, and packaging.
