To Next PageTo Next Page
Need help?Do you have a question about the Bosch GBS 100 A and is the answer not in the manual?
General| Power Input | 100 W |
|---|---|
| Sanding Plate Size | 100 x 100 mm |
| Weight | 1.2 kg |
| Power Source | Corded |
| Power | 100 W |
| Oscillation rate | 15, 000 oscillations/min |
| No-load Speed | 15, 000 oscillations/min |
| Stroke Length | 2.5 mm |
| Length | 250 mm |
Detailed technical specifications for the belt sander models, including power and speed.
Lists and describes the numbered components of the machine for user reference.
Details measured noise and vibration levels according to EN 60745 standards.
Describes the intended applications for dry sanding of wood, plastic, metal, and coated surfaces.
Essential safety guidelines for operating the belt sander to prevent electric shock, fire, and injury.
Instructions on how to adjust the auxiliary handle for better control and working position.
Explains how to connect external vacuum cleaners or use the attached dust bag for dust collection.
Steps to remove and install a new sanding belt, ensuring correct alignment and tension.
Guidance on how to start, stop, and lock the machine, including belt speed pre-selection.
Techniques for effective sanding, including pressure, stroke direction, and handling dust.
Procedures for keeping the machine clean and ensuring optimal performance and longevity.
Instructions for replacing the graphite plate for optimal sanding performance.
Information on obtaining spare parts and contacting customer support for Bosch power tools.
Important instructions for connecting a new 3-pin plug to the 2-wire cable.
Guidelines for environmentally friendly recycling of power tools and accessories.
Guide for selecting appropriate grit and speed for sanding varnishes, paint, wood, and metal.
Translation of sanding applications (e.g., varnishes, wood, metal) into multiple languages.
